A Afl Modified for a Nifty Trading Strategy

#1
Hello Members

Based on the theory of dear one Rajaswamy S have modified a afl to make the work load a bit easier for traders for nifty.........

The strategy is mentioned below,

1ST CONDITION

1.TAKE YESTADAY (H+L+C)/3 { THIS WILL BE FRISTLINE } WE CALL HIM PIVIOT

2. PIVIOT MULTILPY WITH TWO MINUS WITH YESTADAY LOW { THIS WILL BE SECOND LINE }

3.PIVIOT MULTILPY WITH TWO MINUS WITH YESTADAY HIGH { THIS WILL BE THIRD LINE }

AFTER TAKING THIS

YOU HAVE TO PLOTE THREE BLACK LINE IN AMIBROKER

I THINK TILL KNOW ALL OFF HAVE BEEN UNDERSTAND

{ FRIST CONDITION YOU CAN DO THIS THINK BEFORE MARKET HOUR }

CONDITION NO 2 ( PLS READ NOTE DOWN VERY CAREFULLY )

1.SEE THE CANDLE STICE CHART IN FIFTEEN MINS TIME FRAM

2. WATCH WITCH CANDLE HITTING FRIST IN ANY OFF THET BLACK LINE TAKE THET CANDLE ( H L C ) YOU HAVE TO SEE THET CANDLE HAVE MIN 20 POINTS GAP BETWEN HIGH AND LOW OR YOU CAN TAKE PREVIOSE THREE CANDLE AS A CHOICE , WHICH CANDLE IS BIGGER TAKETHET AND TAKE THET { H L C }


The Afl code has been designed to plot EOD Black Lines and then one needs to see the condition 2 as per its mentioned above and the levels for buy and sell would be automatically generated, its just that one thing couldnt had been added in the same, if the line is hit on 15 mins but the 20 points strategy doesnt complete then the past 3 candles high low close is not scanned, just that condition is not fulfilled rest everything has been shared in the code, the code is mentioned below feel free to share your views and suggestions are welcomed on how to improve on the same........

////////////////////////////// INTRA DAY TRADING BASED ON PIVOT........
////////////////// TAKE THE EOD PIVOT AND RESISTANCE 1 AND RESISTANCE 2 ON THE CHARTS.................
////////////// THIS INTRA DAY SYSTEM WOULD WORK ON 15 MINS CHARTS ONLY, WHEN THERE IS A GAP OF 20 POINTS ON THE CANDLE IN THE 15 MINS CHARTS.................
//////////////////// BASICALLY BETWEEN 9 15 TO 930 TAKE THE HIGH LOW AND CLOSE AND INPUT IN THE PIVOT CALCULATOR AND ONE WOULD ARRIVE AT THE 15 MIN PIVOT LEVELS WITH STOP LOSS
/////////////////STOP LOSS IS PIVOT ONLY.........ACCURACY RATE IS VERY HIGH PURELY INTRADAY ONLY.................
/////////////DURING GAP UP AND GAP DOWN DONT TRADE IN THE MARKET AND ALWAYS TAKE TEH 20 POINTS GAO BETWEEN THE HIGH AND LOW ALWAYS............







_SECTION_BEGIN("Price ADX");
function PercentR( periods )
{ return -100 * ( HHV( H, periods ) - C )/( HHV( H, periods ) - LLV( L, periods
) ); }
range = Param("Periods", 14, 2, 200, 1 );
ADX(range);
PDI(range) ;
MDI(range);
Plot( C, "Close", IIf( PDI(range) > MDI(range), ParamColor("Up Color",
colorLime), ParamColor("Down Color", colorRed ) ), styleCandle|styleThick,styleNoTitle |
ParamStyle("Style") | GetPriceStyle() );
Bull_Trend=(PercentR( Param("Periods", 14, 2, 100 ) )> -30);
Bear_Trend=(PercentR( Param("Periods", 14, 2, 100 ) )< -70);
_SECTION_END();

//////////////// pivot section begins
_SECTION_BEGIN("Price");
SetChartOptions(0,chartShowArrows|chartShowDates);
_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, Hi %g, Lo %g, Close %g (%.1f%%) Vol " +WriteVal( V, 1.0 ) +" {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 )) ));
Plot( C, _DEFAULT_NAME(), colorYellow , styleNoTitle | ParamStyle("Style") | GetPriceStyle() );
_SECTION_END();
_SECTION_BEGIN("pivots mw");
SetChartBkColor(2) ;
k=IIf(ParamList("select type","daily|next day")=="daily",-1,0);
k1=-1;
TimeFrameSet(inDaily);
day_h= LastValue(Ref(H,K));
day_l= LastValue(Ref(L,K));
day_c= LastValue(Ref(C,K));
TimeFrameRestore();


/*--------------------------------------*/
// day
DH=Day_h;
DL=Day_L;
DC=Day_C;

// DAY PIVOT Calculation
pd = ( DH+ DL + DC )/3;
sd1 = (2*pd)-DH;
rd1 = (2*pd)-DL;
dp=pd;

ppl = ParamToggle("Plot Pivot Levels","Off|On",1);
numbars = LastValue(Cum(Status("barvisible")));
fraction= IIf(StrRight(Name(),3) == "", 3.2, 3.2);
hts = Param("slide all",33,-1000,1000,1);


{
if(ppl==1) {
Plot(pd,"",colorGold,styleLine|styleDashed|styleNoRescale);
Plot(sd1,"",ColorRGB(73,123,201),styleDashed|styleNoRescale);
Plot(rd1,"",ColorRGB(150,60,39),styleDashed|styleNoRescale);


i=1;

PlotText(" Pivot = " + WriteVal(pd,fraction), LastValue(BarIndex())-(numbars/Hts), dp, colorGold);
PlotText(" R1 = " + WriteVal(rd1,fraction), LastValue(BarIndex())-(numbars/Hts), rd1 , ColorRGB(150,60,39));
PlotText(" S1 = " + WriteVal(sd1,fraction), LastValue(BarIndex())-(numbars/Hts), sd1 , ColorRGB(73,123,201));

}}

//--end----------------------------------------------------------------------------
_SECTION_END();

/*--------------------------------------*/
//////////////pivot section ends


////////////////////15 min pivot begins


SetChartOptions(0,chartShowArrows|chartShowDates);
_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, Hi %g, Lo %g,
Close %g (%.1f%%) Vol " +WriteVal( V, 1.0 ) +"
{{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 )) ));

Plot( C, "Close", ParamColor("Color", colorYellow ), styleNoTitle |
ParamStyle("Style") | GetPriceStyle() );

H1=SelectedValue( TimeFrameGetPrice( "H", in5Minute, -1 ));
L1=SelectedValue(TimeFrameGetPrice( "L", in5Minute, -1 ));
C1=SelectedValue(TimeFrameGetPrice( "C", in5Minute, -1 ));

/*PIVOT Calculation*/
p = ( H1+ L1 + C1 )/3;
s1 = (2*p)-H1;
r1 = (2*p)-L1;
s2 = p -(H1 - L1);
s3 = S1 - (H1-L1);
r2 = p +(H1 - L1);
r3 = R1 +(H1-L1);
///////////////////////////////////////IF WE WANT LINES THEN REMOVE THE // FROM BELOW AND LINES WOULD COME ON CHART///////////////
/////////Plot (p,"Pivot",25,1);
//////////Plot (r1,"R1",12,1);
//////////Plot (r2,"R2",12,1);
///////////Plot (r3,"R3",12,1);
/////////Plot (s1,"S1",3,1);
//////////Plot (s2,"S2",3,1);
/////////////Plot (s3,"S3",3,1);

////////////////////////////////////////////////////////////////Titles///////////////////
Title = EncodeColor(colorOrange)+ Date() + " Close = " + EncodeColor(colorRed) +Close +
EncodeColor(colorOrange) + " Open = " + EncodeColor(colorPink) + O +
EncodeColor(colorOrange) + " High = " + EncodeColor(5) + H +
EncodeColor(colorOrange) + " Low = " + EncodeColor(colorRed) + L + "\n\n"+
EncodeColor(colorGreen) + "Works on 15 min only, When the high low difference is 20 points gap & touching at any of the 3 lines, take the mouse click next candle for targets" +"\n\n"+

EncodeColor(colorRed) + "Buy at= " + EncodeColor(colorPink) + R1 +
EncodeColor(colorRed) + " T1 = " + EncodeColor(colorPink) + R2 +
EncodeColor(colorRed) + " T2 = " + EncodeColor(colorPink) + R3 +
EncodeColor(colorOrange) + "Stop Loss= " + EncodeColor(colorPink) + P + "\n\n"+

EncodeColor(colorGreen) + "Sell below= " + EncodeColor(colorPink) + S1 +
EncodeColor(colorGreen) + " T1= " + EncodeColor(colorPink) + S2 +
EncodeColor(colorGreen) + " T2= " + EncodeColor(colorPink) + S3 +"\n"+
EncodeColor(colorOrange) + "Stop Loss= " + EncodeColor(colorPink) + P + "\n\n"+



_SECTION_END();
////////////////////////Reply With Quote/*--------------------------------------*/

/////////////////15 min pivot ends

_SECTION_BEGIN("Display");
Display= ParamToggle("Display","Off|On",1);
if(Display==1)
{
x=Param("xposn",0,0,1000,1);
y=Param("yposn",569,0,1000,1);

_SECTION_END();}


_SECTION_BEGIN("Background Color");
BKswitch = ParamToggle("Background Color","On,Off");

OUTcolor = ParamColor("Outer Panel Color",ColorRGB(25,25,25));
INUPcolor = ParamColor("Inner Panel Upper",ColorRGB(23,25,23));
INDNcolor = ParamColor("Inner Panel Lower",ColorRGB(23,25,23));
TitleColor = ParamColor("Title Color ",ColorRGB(23,25,23));

if (NOT BKswitch)
{
SetChartBkColor(OUTcolor); // color of outer border
SetChartBkGradientFill(INUPcolor,INDNcolor,TitleColor); // color of inner panel
}
_SECTION_END();

///////////////God is Great

//////////////////Jai Ganesha
 

deadbrain

Well-Known Member
#2
Not working on my Ami.. am i missing anything?
 

johnnypareek

Well-Known Member
#3
Not working on my Ami.. am i missing anything?
after peating formula when u insert errors rthere, there will be gap delete these gaps. or while u click insert, afl window (at bottom) will show errors, click one by one on that error it will take cursur to the point where error is, just delete space.
 

deadbrain

Well-Known Member
#4
after peating formula when u insert errors rthere, there will be gap delete these gaps. or while u click insert, afl window (at bottom) will show errors, click one by one on that error it will take cursur to the point where error is, just delete space.
tnx, it is working now!
 

Similar threads

Broker Special Offers

Intraday Higher Leverage

Save up to 90% in brokerage and get higher leverage for intraday trades.

Name:Phone:
Email:City:
State:
Are you a day trader?