Snap Shot of a New AFL-- "No Trade Zone"-Does any body Have it?

#85
Dear Zultan,

Link is not working. o.k. its nice. I have my own simple system for EOD basis. It gives me good consistent results so far. Only on curiosity i given earlier messages to you to see that system. I am very much comfortable with my own system it was prepared by me after so many years struggle in the market and i have no need other system. I know no system and no single afl give success, only trader performance( System + money management + emotional management ) counts. Thanks
 
Last edited:
#86
Sir,

Afew days back some one posted(I really dont remember the name of the mailer of that post as i delete the post after I finish reading the post so as to keep my inbox empty) AB Kwik POP indicators on manshiRT yahoo group.Dont know whether others tried it with ETP or not but I am attaching here an modified afl plz change a few settings by right clicking on the charts to get the next to perfect ETP.Hope this will be helpfull to all the members.
DOnt know how to upload but here is the link for Image shack
http://img513.imageshack.us/i/a2jsettingspart1.jpg/
http://img269.imageshack.us/i/a2jsettingspart2.jpg/
Posting the afl right here

_SECTION_BEGIN("TSKPType1,2,or3setups");
/* TSKPType 1, 2, or 3 setups
Type 1 Buy setup Sell setup
A higher low is in place A lower high is in place
A Blue Arrow below a bar A Red Arrow above a bar
The bar is an up or dojii blue bar The bar is an down or dojii red bar
A900 above Autostop A900 below Autostop
Medium remained blue during the recent retracement Medium remained red during the recent retracement

Type 2 Buy setup Sell setup
A higher low is in place A lower high is in place
A Blue Arrow below a bar A Red Arrow above a bar
The bar is an up or dojii blue bar The bar is an down or dojii red bar
A900 above Autostop A900 below Autostop
Price closed above KPWaterlevel Price closed below KPWaterlevel
Medium changed to red during the recent retracement Medium changed to blue during the recent
AND was blue at the time when the Blue up arrow retracement AND was red at the time when the red
appeared. up arrow appeared.

Type 3 Buy setup Sell setup
A higher low is in place A lower high is in place
A Blue Arrow below a bar A Red Arrow above a bar
The bar is an up or dojii blue bar The bar is an down or dojii red bar
A900 above Autostop A900 below Autostop
Price closed above KPWaterlevel Price closed below KPWaterlevel
Medium changed to red during the recent Medium changed to blue during the recent
retracement, was still red at the time when the Blue retracement, was still blue at the time when the Red
up arrow appeared but above the Moving Average down arrow appeared but below the Moving Average

*/
SetBarsRequired(350, -0);
// ------------- EazyTradePlus V1.1
SetChartOptions(0,chartShowDates|chartWrapTitle);
AboveUBB =0;
SellSignal=0;
BuySignal=0;
//--------------------------------EazyTradePlus V1.1 Main AFL
SetChartBkColor(ParamColor("Outer panel color ",colorLightYellow)); // color of outer border
SetChartBkGradientFill( ParamColor("Inner panel color upper half", colorBlack),
ParamColor("Inner panel color lower half", colorDarkOliveGreen)); // color of inner panel
//user parameters
parmPlotScoreCard = ParamToggle("Plot KPScoreCard", "No|Yes", 1);
parmPlotA900AutoStop = ParamToggle("Plot A900/AutoStop", "No|Yes", 0);
parmA900Color = ParamColor("A900 Color", colorWhite);
parmA900Style = ParamStyle("A900 Style", styleLine, maskAll);
parmAutoStopColor = ParamColor("AutoStop Color", colorYellow);
parmAutoStopStyle = ParamStyle("AutoStop Style", styleLine, maskAll);
parmPPTextColor = ParamColor("PP Text color", colorBlack);
parmPPTrndColorUp = ParamColor("PP Trend Up color", ColorRGB(167,224,243) );
parmPPTrndColorDn = ParamColor("PP Trend Dwn color", ColorRGB(255,192,203) );
parmPPTextOffSet = Param("PP OffSet", 0.60, 0.40, 1.5, 0.1);
parmTickMultipler = Param("M/W tick allowance", 1, 0, 10, 1);
parmA900AutoStopX = ParamToggle("Plot A900/AutoStop Cross", "No|Yes");
parmA900AutoStopColorX = ParamColor("A900/AutoStop Cross Color", colorBlack);
ParmSCThreshold = Param("ScoreCard Threshold", 3, 1, 9, 1);
parmVoice = ParamToggle("Voice 123 Setups", "No|Yes", 0);
parmAlert = ParamToggle("Alert 123 Setups", "No|Yes", 0);
parmPivotPop = ParamToggle("PivotPop", "No|Yes", 1);
parmBarCancel = Param("Bar Cancel", 7, 1, 20, 1);
parmWaterLevelColor = ParamColor("WalterLevel Color", ColorRGB(127,255,212));
parmWaterLevelStyle = ParamStyle("WaterLevel Style", styleLine, maskAll);
parmBBPeriod = Param("Bollinger Band Period", 10, 2, 30, 1);
parmBBSD = Param("bollinger Band SD", 0.8, 0.2, 3.0);
ParmPlotPPIndicators = ParamToggle("Plot Pivot Pop indicators", "No|Yes", 0);
parmBBColor = ParamColor("BBands Color", colorBlack);
parmBBStyle = ParamStyle("BBands Style", styleLine, maskAll);

ParmDebug = ParamToggle("Debug", "No|Yes", 0);

// constants
_N(PaneName = Name() + Interval(2)+ _SECTION_NAME());
_N(NewBarName = "NewBar" + PaneName);

//functions
function NewBarP()
{
PrevDT = StaticVarGet( NewBarName);
DT = LastValue(DateTime());
StaticVarSet( NewBarName,DT);
return DT != PrevDT;
}
function MRoundP(Number, Multiple )
{
if(Multiple == 0 )
{

xMultiple = 0.01; }
else
{
xMultiple = Multiple;
}
Divided = Number / xMultiple;
intDivided = int(Divided);
intDivided = intDivided + round(Divided - intDivided);
return intDivided * xMultiple;
}

//miscellaneous setups
ObjAB = CreateObject("Broker.Application");
ticker = objAB.Stocks(Name() );
if(ticker.TickSize == 0)
{
TickValue = 0.01; //set TickValue to a penney
}
else
{
TickValue = ticker.TickSize; // use Tick Size for this symbol
}
NewBarSignal = NewBarP();
// KP Indicators
KPA900 = E_TSKPA900(Close);
KPAutoStop = E_TSKPAUTOSTOP(High,Low,Close);
Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume); //ScoreCard
KPScoreCard = 0;
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd0 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd1 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd2 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd3 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd4 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd5 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd6 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd7 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd8 > 0, 1, -1);

if(parmDebug == 1)
{
printf("a900: %0.6f% \nAutoStop: %0.6f%\nScoreCard: %0.0f%\n", KPA900, KPAutoStop, KPScoreCard);
}
if(parmPlotScoreCard == 1)
{
_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, Hi %g, Lo %g, Close %g% (%0.4f%) {{VALUES}}", O, H, L, C, SelectedValue( C - Ref(C, -1)) ));
if( ParamToggle("Tooltip shows", "All Values|Only Prices" ) )
{
ToolTip=StrFormat("Open: %g\nHigh: %g\nLow: %g\nClose: %g (%.2f%%)\nVolume: "+NumToStr( V, 1 ), O, H, L, C, SelectedValue( ROC( C, 1 )));
}
Color = IIf(KPScoreCard >= parmSCThreshold, colorBlue, IIf(KPScoreCard <= -parmSCThreshold, colorRed, colorYellow) );
Plot( C, "Close", Color , styleNoTitle | ParamStyle("OHLC Style",styleBar | styleThick) | GetPriceStyle() );
}
//user want A900/AutoStop plotted
if(parmPlotA900AutoStop == 1)
{
Plot(KPA900, "A900", parmA900Color, parmA900Style);
Plot(KPAutoStop, "AutoStop", parmAutoStopColor, parmAutoStopStyle);
}
// find A900/AutoStop cross over/under with ScoreCard confirmation.
XOUp = (KPA900 > KPAutoStop) AND (KPScoreCard >= parmSCThreshold); // New Pivot Low
XODn = (KPA900 < KPAutoStop) AND (KPScoreCard <= -parmSCThreshold); // New Pivot High
if(parmDebug == 1)
{
printf(WriteIf(XOUp, "before= XOUp: True", "before= XOUp: False") + WriteIf(XODn, " XODn: True\n", " XODn: False\n") );
}
//remove duplicate signals
XOUp = ExRem(XOUp, XODn);
XODn = ExRem(XODn, XOUp);

if(parmDebug == 1)
{
printf(WriteIf(XOUp, "after= XOUp: True", "after= XOUp: False") + WriteIf(XODn, " XODn: True\n", " XODn: False\n") );
}
//find the current Pivot Points - PL and PH
//remember XOUp = 1 means a PL and XODn =1 means a PH
PLBars = IIf(XOUp, LowestSinceBars(XODn, L ,1), 0); //find the bar that produced the Lowest Low
PHBars = IIf(XODn, HighestSinceBars(XOUp, H, 1),0); //find the bar that produced the Highest High
//PLPrice = IIf(XOUp, Ref(L, -PLBars), 0);
//PHPrice = IIf(XODn, Ref(H, -PHBars),0);
PLPrice = Ref(L, -PLBars);
PHPrice = Ref(H, -PHBars);

//keep track of the previous Pivot Points
PrevPLBars = Ref(BarsSince(XOUp), -1) +1;
PrevPHBars = Ref(BarsSince(XODn), -1) +1;
PrevPLPrice = Ref(PLPrice, -prevPLBars);
PrevPHPrice = Ref(PHPrice, -PrevPHBars );
PivotsCloseEnough = TickValue * parmTickMultipler;
PLDifference = MroundP(PLPrice - PRevPLPrice, ticker.TickSize);
PHDifference = MroundP(PHPrice - PrevPHPrice, ticker.TickSize);
PPTrend = IIf(XOUp AND (PLDifference > PivotsCloseEnough) AND PrevPHPrice > PrevPLPrice AND PRevPHPrice > PLPrice, 1,
IIf(XOUp AND (PLDifference < - PivotsCloseEnough) AND PRevPHPrice > PrevPLPrice AND PrevPHPrice > PLPrice, -1,
IIf(XODn AND (PHDifference > PivotsCloseEnough) AND PrevPLPrice < PrevPHprice AND PrevPLPrice < PHPrice, 1,
IIf(XODn AND (PHDifference < -PivotsCloseEnough) AND PrevPLPrice < PrevPHPrice AND PrevPLPrice < PHPrice, -1,
IIf(XOUp AND (abs(PLDifference) <= PivotsCloseEnough) AND PrevPHPrice > PrevPLPrice AND PRevPHPrice > PLPrice, 2,
IIf(XODn AND (abs(PHDifference) <= PivotsCloseEnough) AND PrevPLPrice < PrevPHPrice AND PrevPLPrice < PHPrice, -2, 0)))) ));
if(ParmDebug)
{
printf("Current PH Bar: %g% /Price: %g%\n", PHBars, PHPrice);
printf("Current PL Bar: %g% /Price: %g%\n", PLBars, PLPrice);
printf("Previous PH Bar: %g% /Price: %g%\n", PrevPHBars, PrevPHPrice);
printf("Previous PL Bar: %g% /Price: %g%\n", PrevPLBars, PrevPLPrice) ;
printf("PP Trend: %g%\n", PPTrend);
printf("PHPrice - PrevPHPrice: %g%\nPLPrice - PrevPLPrice: %g%\nPivotsCloseEnough: %g%", PHDifference, PLDifference, PivotsCloseEnough);
}
//PLot pivots as text
dist = parmPPTextOffSet * ATR(10);
//for( i = 0; i < BarCount -1; i++)
for( i = 0; i < BarCount ; i++)
{
if(XOUp[i ] == 1 AND abs(PPTrend) != 2) //cross up -plot the Pivot Low
{
PlotText("PL", i - PLBars, PLPrice - dist , parmPPTextColor, IIf(PPTrend == 1, parmPPTrndColorUp, IIf(PPTrend == -1, parmPPTrndColorDn, colorYellow) ));
}
if(XODn[i ] == 1 AND abs(PPTrend) != 2) //cross down - plot the pivot high
{
PlotText("PH", i - PHBars, PHPrice + dist, parmPPTextColor, IIf(PPTrend == 1, parmPPTrndColorUp, IIf(PPTrend == -1, parmPPTrndColorDn, colorYellow) ));
}
if(XOUp[i ] == 1 AND (PPTrend) == 2) // the Pivot Low is a W Bottom
{
PlotText("PW", i - PLBars, PLPrice - dist , parmPPTextColor, colorYellow) ;
}
if(XODn[i ] == 1 AND PPTrend == -2) //cross down - pivot high is a M Top
{
PlotText("PM", i - PHBars, PHPrice + dist, parmPPTextColor, colorYellow) ;
}
} //end For
// Plot A900/AutoStop cross over/under
if(parmA900AutoStopX == 1)
{
PlotShapes(IIf(Cross(KPA900, KPAutoStop), shapeUpTriangle, shapeNone), parmA900AutoStopColorX, 0, L, -30);
PlotShapes(IIf(Cross(KPAutoStop, KPA900), shapeDownTriangle, shapeNone), parmA900AutoStopColorX, 0, H , -30);
}
//PHLine = LineArray(BarCount - LastValue(PHBars) -3, LastValue(PHPrice), BarCount - LastValue(PHBars) +2, LastValue(PHPrice), 0);
//Plot(PHLine, "PH", colorBlack, styleLine);
//PLLine = LineArray(BarCount - LastValue(PLBars) -3, LastValue(PLPrice), BarCount - LastValue(PLBars) +2, LastValue(PLPrice), 0);
//Plot(PLLine, "PL", colorBlack, styleLine);
// identify M, lazy M, W and Lazy W formations
//Pivot Pop code
if(parmPivotPop == 1)
{
//Kp indicators for Pivot Pop
dummy = E_TSKPFAST2(Open, High, Low, Close, Volume);
KPFast2 = IIf(tskp_fast2val1 > 0, 1, -1);
//calculations
BarsSinceXOUp =BarsSince(XOUp);
BarsSinceXODn = BarsSince(XODn);
UBB = BBandTop(C, parmBBPeriod, parmBBSD);
LBB = BBandBot(C, parmBBPeriod, parmBBSD);
PopFilter = True;
if(parmDebug == 1)
{
printf("\nFast2: %1.0f% \nUBB: %0.6f%\nLBB: %0.6f%\nC: %g%\n", KPFast2, UBB, LBB, C);
printf("Bars since Last XOUp: %1.0f%\nBars since last XODn: %1.0f%\n", BarsSinceXOUp, BarsSinceXODn );
printf("Bars since PPTrnd =1: %1.0f%\nBars since PPTrnd = -1: %1.0f%\n", BarsSince(PPTrend ==1), BarsSince(PPTrend == -1) );

}
PPopUp = (BarsSince(PPTrend >= 1) < BarsSince(PPTrend <= -1)) AND (BarsSince(XOUp) <= parmBarCancel) AND (KPA900 >= KPAutoStop) AND(KPFast2 == 1) AND (KPScoreCard >= 5)
AND PopFilter AND (C > UBB) AND (C > O) ;
PPopUp = IIf( PPopUp AND Sum(PPopUP, BarsSince(XOUp)+1) == 1, True, False ); //keep only the 1st signal
PPopDn = (BarsSince(PPTrend <= -1) < BarsSince(PPTrend >= 1)) AND (BarsSince(XODn) <= parmBarCancel) AND (KPA900 <= KPAutoStop) AND(KPFast2 == -1) AND (KPScoreCard <= -5)
AND PopFilter AND (C < LBB) AND (C < O) ;
PPopDn = IIf( PPopDn AND Sum(PPopDn, BarsSince(XODn) + 1) == 1, True, False); //keep only the first signal
if(parmDebug == 1)
{
printf(WriteIf(PPopUp,"PPopUp: True", "PPopUp: False") + WriteIf(PPopDn, " PPopDn: True\n", " PPopDn: False\n") );
printf("PPopUp sum: %1.0f% \nPPopDn sum: %1.0f%\n", Sum(PPopUP, BarsSince(XOUp)) , Sum(PPopDn, BarsSince(XODn)) );
}
// Plots
PlotShapes(IIf(PPopUp, shapeHollowUpArrow, shapeNone), colorDarkBlue, 0, L, -25);
PlotShapes(IIf(PPopDn, shapeHollowDownArrow, shapeNone), colorDarkRed, 0, H, -25);

if(ParmPlotPPIndicators == 1) //plot the Pivot Pop Indicators
{
Plot(UBB, "Upper BB", parmBBColor, parmBBStyle);
Plot(LBB, "Lower BB", parmBBColor, parmBBStyle);
if(parmPlotA900AutoStop == 1)
{
Plot(KPA900, "A900", parmA900Color, parmA900Style);
Plot(KPAutoStop, "AutoStop", parmAutoStopColor, parmAutoStopStyle);
}
Plot( 0.5, "Fast2", IIf(tskp_fast2val1 > 0, parmPPTrndColorUp, parmPPTrndColorDn) , styleArea | styleNoLabel | styleOwnScale , 0, 10);
} //endif parmPlotPPIndicators
} // end if parmPivotPop
// Type 1, 2 or 3 setups
// kp indicators
KPWaterlevel = E_TSKPWATERLEVEL(Open,High,Low,Close,Volume);
dummy = E_TSKPMEDIUM(Close);
KPMediumUp = tskp_mediumup;
KPMediumDn = tskp_mediumdown;
KPMediumMA = tskp_mediumma;
KPMedium = KPMediumUp + KPMediumDn;
//calculations
PLBars = IIf(XOUp, LowestSince(XODn, KPMedium ,1), 0); //find the Lowest Low
PHBars = IIf(XODn, HighestSinceBars(XOUp, KPMedium, 1),0); //find the bar that produced the Highest High
PrevPLMedium = Ref(KPMedium, -prevPLBars);
PrevPHMedium = Ref(KPMEdium, -PrevPHBars );

Type1Filter = IIf(PPopUp AND (LowestSince(XODn, KPMedium, 1) > 0 ) AND (HighestSince(XODn, KPMedium, 1) > 0 ), True, IIf(PPopDn AND (HighestSince(XOUp, KPMedium ,1) < 0) AND (LowestSince(XOUp, KPMedium ,1) < 0), True, False));
Type2Filter = IIf(PPopUp AND LowestSince(XODn, KPMedium, 1) < 0 AND KPMedium > 0, True, IIf(PPopDn AND (HighestSince(XOUp, KPMedium ,1) > 0) AND KPMEdium < 0, True, False));
Type3Filter = IIf(PPopUp AND LowestSince(XODn, KPMedium, 1) < 0 AND KPMedium < 0 AND (KPMedium > KPMediumMA), True, IIf(PPopDn AND (HighestSince(XOUp, KPMedium ,1) > 0) AND KPMEdium > 0 AND(KPMedium < KPMediumMA), True, False));

Type1Buy = PPopUp AND ((Close - Open) >= 0) AND (KPScoreCard >= ParmSCThreshold) AND Type1Filter;
Type1Sell = PPopDn AND ((Close - Open) <= 0) AND (KPScoreCard <= -ParmSCThreshold) AND Type1Filter;
Type2Buy = PPopUp AND ((Close - Open) >= 0) AND (KPScoreCard >= ParmSCThreshold) AND Type2Filter AND C > KPWaterLevel;
Type2Sell = PPopDn AND ((Close - Open) <= 0) AND (KPScoreCard <= -ParmSCThreshold) AND Type2Filter AND C < KPWaterLevel;
Type3Buy = PPopUp AND ((Close - Open) >= 0) AND (KPScoreCard >= ParmSCThreshold) AND Type3Filter AND C > KPWaterLevel;
Type3Sell = PPopDn AND ((Close - Open) <= 0) AND (KPScoreCard <= -ParmSCThreshold) AND Type3Filter AND C < KPWaterLevel;


if(parmDebug == 1)
{
printf("Type1Filter: %g%\nType2Filter: %g%\nType3Filter: %g%\n", Type1Filter, Type2Filter, Type3Filter);
printf("KPWaterlevel: %g%\n", KPWaterLevel);
printf("KPMedium: %g%\nKPMediumMA: %g%\n", KPMedium, KPMediumMA);
printf("Highest XOUp Medium: %g%\nLowest XOUp Medium: %g%\n", HighestSince(XOUp, KPMedium, 1), LowestSince(XOUp, KPMedium ,1) );
printf("Highest XODn Medium: %g%\nLowest XODn Medium: %g%\n", HighestSince(XODn, KPMedium, 1), LowestSince(XODn, KPMedium ,1) );
printf("Prev PH Medium: %g%:prev PL Medium: %g%\n", PrevPHMedium, PrevPLMedium);
printf("Type1Buy: %g%:Type1Sell: %g%\n", Type1Buy, Type1Sell);
printf("Type2Buy: %g%:Type2Sell: %g%\n", Type2Buy, Type2Sell);
printf("Type3Buy: %g%:Type3Sell: %g%\n", Type3Buy, Type3Sell);
}

// Plots
PlotShapes(IIf(Type1Buy, shapeDigit1 , IIf(Type1Sell, shapeDigit1, shapeNone)), IIf(Type1Buy, colorBlue, IIf(Type1Sell, colorRed, Null)), 0, IIf(Type1Buy, High, IIf(Type1Sell, L, O)), IIf(Type1Buy, 30, IIf(Type1Sell, -30, 0)) );
PlotShapes(IIf(Type2Buy, shapeDigit2 , IIf(Type2Sell, shapeDigit2, shapeNone)), IIf(Type2Buy, colorBlue, IIf(Type2Sell, colorRed, Null)), 0, IIf(Type2Buy, High, IIf(Type2Sell, L, O)), IIf(Type2Buy, 30, IIf(Type2Sell, -30, 0)) );
PlotShapes(IIf(Type3Buy, shapeDigit3 , IIf(Type3Sell, shapeDigit3, shapeNone)), IIf(Type3Buy, colorBlue, IIf(Type3Sell, colorRed, Null)), 0, IIf(Type3Buy, High, IIf(Type3Sell, L, O)), IIf(Type3Buy, 30, IIf(Type3Sell, -30, 0)) );

Plot(KPWaterLevel, "KPWaterLevel", parmWaterLevelColor, parmWaterLevelStyle);
// HMM how to print Medium on a price chart

//voice
if(parmVoice ==1)
{
if(NewBarSignal)
{
if( LastValue(Ref(Type1Buy, -1)) == 1) Say(Interval(2) + " New Type one buy.");
if( LastValue(Ref(Type2Buy, -1)) == 1) Say(Interval(2) + " New Type two buy");
if( LastValue(Ref(Type3Buy, -1)) == 1) Say(Interval(2) + " New Type three buy.");

if( LastValue(Ref(Type1Sell,-1)) ==1) Say(Interval(2) + " New Type one sell.");
if( LastValue(Ref(Type2Sell,-1)) ==1) Say(Interval(2) + " New Type two sell.");
if( LastValue(Ref(Type3Sell,-1)) ==1) Say(Interval(2) + " New Type three sell.");
}
}
//alerts
if(parmAlert ==1)
{
AlertIf(NewbarSignal AND Ref(Type1Buy, -1), "", "Type 1 Buy.", 1, 15, 0);
AlertIf(NewbarSignal AND Ref(Type2Buy, -1), "", "Type 2 Buy.", 1, 15, 0);
AlertIf(NewbarSignal AND Ref(Type3Buy, -1), "", "Type 3 Buy.", 1, 15, 0);
AlertIf(NewbarSignal AND Ref(Type1Sell, -1), "", "Type 1 Sell.", 2, 15, 0);
AlertIf(NewbarSignal AND Ref(Type2Sell, -1), "", "Type 2 Sell.", 2, 15, 0);
AlertIf(NewbarSignal AND Ref(Type3Sell, -1), "", "Type 3 Sell.", 2, 15, 0);
}
_SECTION_END();


_SECTION_BEGIN("ABKPPowerPops");
/* ABKPPowerPops
In any event, these are the elements needed for the new POWER POP dot.
BUY DOT placed below the bar once only. A new dot can only appear when we get an opposite configuration.
1) Triggosc is >0
2) Triggerline is >= Stopline
3) Scorecard is >5
4) Medium is > Medium MA
5) Shorttermtradebias > 0
6) Close is> 18 period Standard error plot. This one is the tricky one because the settings I'm using are 18 periods of the close and a smoothing average of 9 periods. I'm not sure how you can reference that value.

Naturally a sell dot would be just the opposite.

*/

parmPPUpColor = ParamColor("Power Pops up color", colorGreen);
parmPPDnColor = ParamColor("Power Pops dn color", ColorRGB(160, 32, 240));
parmBand = ParamList("Use SEBand", "Upper/Lower|Middle", 0);
parmDetrendPeriod = Param("Detrend period", 8, 1, 20, 1);
parmPlotEBand = ParamToggle("Plot mini-SEBand", "No|Yes", 1);
parmSEBandPeriod = Param("mini-SEBand period", 18, 2, 20, 1);
parmSEBandSmooth = Param("mini-SEBand smooth period", 9, 1, 20, 1);
parmMBColor = ParamColor("mini-SEBand MB color",colorBlack);
parmMBStyle = ParamStyle("mini-SEBand MB Style", style=styleDashed | styleNoLabel, Mask=maskAll );
parmUBColor = ParamColor("mini-SEBand MB Color",colorBlack);
parmUBStyle = ParamStyle("mini-SEBand MB Style", style=styleLine | styleNoLabel, Mask=maskAll );
parmLBColor = ParamColor("mini-SEBand MB Color",colorBlack);
parmLBStyle = ParamStyle("mini-SEBand MB Style", style=styleLine | styleNoLabel, Mask=maskAll );
parmPlotTargets = ParamToggle("Plot stop", "No|Yes", 0);
parmTargetColor = ParamColor("Stop color", colorDarkRed);
parmTargetStyle = ParamStyle("Stop style", styleLine | styleDots | styleStaircase, maskAll);
parmPlotRibbon = ParamToggle("Plot as ribbon", "No|Yes", 0);
parmRibbonSize = Param("Ribbon Size", 1, 0.5, 10, 0.5);
ParmSCThreshold = Param("ScoreCard Threshold", 5, 1, 9, 1);
parmVoice = ParamToggle("Voice", "No|Yes", 0);
parmDebug = ParamToggle("Debug", "No|Yes", 0);
SetBarsRequired(350, -1);
// constants
_N(CPaneName = Name() + Interval(2) + _SECTION_NAME());
_N(CNewBarName = "NewBar" + CPaneName);

//functions
function CNewBar()
{
PrevDT = StaticVarGet( CNewBarName);
DT = LastValue(DateTime());
StaticVarSet( CNewBarName,DT);
return DT != PrevDT;
}
function MRoundB(Number, Multiple )
{
if(Multiple == 0 )
{

xMultiple = 0.01; }
else
{
xMultiple = Multiple;
}
Divided = Number / xMultiple;
intDivided = int(Divided);
intDivided = intDivided + round(Divided - intDivided);
return intDivided * xMultiple;
}

ObjAB = CreateObject("Broker.Application");
ticker = objAB.Stocks(Name() );
NewBarSignal = CNewBar();

//KP indicators
sw = E_TSKPUPSELL(Open,High,Low,Close,Volume);
KPTriggerLine = tskp_triggerline;
dummya = E_TSKPMEDIUM(Close);
KPMediumUp = tskp_mediumup;
KPMediumDn = tskp_mediumdown;
KPMediumMA = tskp_mediumma;
Ctmpl = E_TSKPCOLORTMPL(Open,High,Low,Close,Volume); //ScoreCard
KPScoreCard = 0;
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd0 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd1 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd2 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd3 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd4 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd5 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd6 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd7 > 0, 1, -1);
KPScoreCard = KPScoreCard + IIf(tskp_colortmplcnd8 > 0, 1, -1);
KPStopLine = E_TSKPSTOPLINE(High,Low,Close);
dummy = E_TSKPSHORTTERMTRADEBIAS(High,Low,Close);
KPSTTB = tskp_sttb1;

if(parmDebug == 1)
{
printf("KBTriggerLine: %g%\nKPSTTB: %g%\nKPMediumUp: %g%\nKPMediumDn: %g%\nKPMediumMa: %g%\nScoreCard: %f1.0%\nStopLine: %g%", KPTriggerLine, KPSTTB, KPMediumUp, KPMediumDn, KPMediumMa, KPScoreCard, KPStopLine);
}
// calculations
//Detrend = KPTriggerLine - MA(KPTriggerLine, parmDetrendPeriod); //Detrend KPTriggerLine
TriggOsc = C - Ref( MA( C, parmDetrendPeriod ), -( 1 + parmDetrendPeriod/2 ) );
LRCurve = LinearReg( C, parmSEBandPeriod );
MALRCurve = MA(LRCurve, parmSEBandSmooth);
SEValue = StdErr( C, parmSEBandPeriod );
SErrorAvg = MA(SEValue, parmSEBandSmooth);
LowerBand = MALRCurve - SErrorAvg ;
UpperBand = MALRCurve + SErrorAvg ;
if(parmBand == "Upper/Lower")
{
UpSignal = TriggOsc >= 0 AND KPTriggerLine > KPStopLine AND KPScoreCard > parmSCThreshold AND KPSTTB >= 0 AND (KPMediumUp > KPMediumMa OR KPMediumDn > KPMediumMa) AND C > UpperBand ;
DnSignal = TriggOsc < 0 AND KPTriggerLine < KPStopLine AND KPScoreCard < parmSCThreshold AND KPSTTB < 0 AND (KPMediumUp < KPMediumMA OR KPMediumDn < KPMediumMA) AND C < LowerBand;
}
else //assume Middle band
{
UpSignal = TriggOsc >= 0 AND KPTriggerLine > KPStopLine AND KPScoreCard > parmSCThreshold AND KPSTTB >= 0 AND (KPMediumUp > KPMediumMa OR KPMediumDn > KPMediumMa) AND C > MALRCurve ;
DnSignal = TriggOsc < 0 AND KPTriggerLine < KPStopLine AND KPScoreCard < parmSCThreshold AND KPSTTB < 0 AND (KPMediumUp < KPMediumMA OR KPMediumDn < KPMediumMA) AND C < MALRCurve;
}
UpSignal = ExRem(UpSignal, DnSignal); //remove duplicate signals
DnSignal = ExRem(DnSignal, UpSignal);

if(parmDebug == 1)
{
printf("Detrend: %g%\UpperBand: %g%\nLowerBand: %g%\n", TriggOsc, UpperBand, LowerBand);
printf(WriteIf(UpSignal, "UpSignal: True", "UpSignal: False") + WriteIf(DnSignal, " DnSignal: True\n", " DnSignal: False\n") );

}
//plots
if(parmPlotRibbon == 0)
{
PlotShapes(IIf(UpSignal, shapeCircle, shapeNone), parmPPUpColor, 0, L, -10);
PlotShapes(IIf(DnSignal, shapeCircle, shapeNone), parmPPDnColor, 0, H, 10);
}
else
{
Plot(parmRibbonSize, "", IIf(UpSignal, parmPPUpColor, IIf(DnSignal, parmPPDnColor, Null )), styleArea | styleNoLabel | styleOwnScale , 0, 10);

}
if(parmPlotEBand == 1)
{
Plot( MALRCurve , "MidBand", parmMBColor , parmMBStyle);
Plot( UpperBand , "UpperBand",parmUBColor ,parmUBStyle );
Plot( LowerBand , "LowerBand", parmLBColor , parmLBStyle);
}
if(parmVoice == 1)
{
if(NewBarSignal)
{
BarUpSince = BarsSince(UpSignal);
BarDnSince = BarsSince(DnSignal);
Stop = IIf( BarUpSince <= BarDnSince, Ref(L, - BarUpSince) - ticker.TickSize, Ref(H, - BarDnSince) + ticker.TickSize);
if(LastValue(Ref(UpSignal, -1)) ) Say(Interval(2) + " Power pop: up. Stop at " + NumToStr(Ref(L, -1) - ticker.TickSize, 1.2) + ".");
if(LastValue(Ref(DnSignal, -1)) ) Say(Interval(2) + " Power pop: down. Stop at " + NumToStr(Ref(H, -1) + ticker.TickSize, 1.2) + ".");
}

}
if(parmPlotTargets == 1)
{
//RangeAvg = MRoundB(Ref(MA(H-L, 5), -1) , ticker.ticksize ) ;
BarUpSince = BarsSince(UpSignal);
BarDnSince = BarsSince(DnSignal);
//PT = IIf( BBarUpSince <= BBarDnSince, Ref(O, - BBarUpSince + 1 ) + Ref(RangeAvg, -BBarUpSince -1), Ref(O, - BBarDnSince + 1) - Ref(RangeAvg, -BBarDnSince -1) );
Stop = IIf( BarUpSince <= BarDnSince, Ref(L, - BarUpSince) - ticker.TickSize, Ref(H, - BarDnSince) + ticker.TickSize);
Plot(Stop, "Stop", parmTargetColor, parmTargetStyle);
//Plot(PT, "Target", colorGreen, styleLine | styleStaircase);
}
_SECTION_END();

_SECTION_BEGIN("ABKPSEB");
/* Standard Error Bands */
// user parameters
Periods = Param("Standard Error", 80, 1, 200, 1);
Smooth = Param("Smooth",14,2,100,1);
parmMBColor = ParamColor("Color MB",colorPlum);
parmMBStyle = ParamStyle("Style MB", style=styleDashed | styleNoLabel, Mask=maskAll );
parmUBColor = ParamColor("Color UB",colorDarkRed);
parmUBStyle = ParamStyle("Style UB", style=styleLine | styleNoLabel, Mask=maskAll );
parmLBColor = ParamColor("Color LB",colorDarkRed);
parmLBStyle = ParamStyle("Style LB", style=styleLine | styleNoLabel, Mask=maskAll );
ParmCloud = ParamToggle("Cloud", "No|Yes", 0);
parmCloudColor = ParamColor("Cloud Color", ColorRGB( 40,40,40) );
ParmField = ParamField("Field", -1);
parmTT = ParamToggle("Plot Tone/Trend", "No|Yes", 0);
parmToneColorUp = ParamColor("Tone Color Up", ColorRGB(167, 224, 243) );
parmToneColorDn = ParamColor("Tone Color Dn", ColorRGB(255, 192, 203) );
parmTrendColorUp = ParamColor("Trend Color Up", ColorRGB(167, 224, 243) );
parmTrendColorDn = ParamColor("Trend Color Dn", ColorRGB(255, 192, 203) );
RibbonSize = Param("Ribbon Size", 1 , 0.5, 10, 0.5);
SetBarsRequired(700, -1);
// calculations
LRCurve = LinearReg( ParmField, periods );
MALRCurve = MA(LRCurve, Smooth);
SEValue = StdErr( ParmField, periods );
SErrorAvg = MA(SEValue, Smooth);

LowerBand = MALRCurve - SErrorAvg ;
UpperBand = MALRCurve + SErrorAvg ;

Plot( MALRCurve , "MidBand", parmMBColor , parmMBStyle);
Plot( UpperBand , "UpperBand",parmUBColor ,parmUBStyle );
Plot( LowerBand , "LowerBand", parmLBColor , parmLBStyle);
//paint inside the bands
if(parmCloud == 1)
{
PlotOHLC( UpperBand, UpperBand, LowerBand, LowerBand, "Band", parmCloudColor, styleCloud | styleNoLabel);
}
//paint tone and trend
if(parmTT == 1)
{
PlotOHLC( UpperBand, UpperBand, LowerBand, LowerBand, "Band", IIf(Low > UpperBand, parmTrendColorUp, IIf(High < LowerBand, parmTrendColorDn, parmCloudColor)) , styleCloud | styleNoLabel);
Plot( RibbonSize, "Tone", IIf(Close > MALRCurve, parmToneColorUp, parmToneColorDn) , styleArea | styleNoLabel | styleOwnScale , 0, 10);
}







Regards
Sikander999

Hi,

Please suggest me as how to use this AFL in intraday trading?
 

sahil79

Active Member
#87
zultan sir, thanx a lot for ur great work. sir, im looking for the afl asked by kargocu sir, above but I am not getting the link, can U guide me to the link please?
thanx in adv
regards
 

pkgmtnl

Well-Known Member
#88
This Hacker Sir,

"Hacker" ji Seems the owner of this AFL which was being discussed here, who post only on forum only on this thread and with a image of this AFL.

Seems that gentlemen only with new name only,
 

pkgmtnl

Well-Known Member
#89
Dear Zultan,

Link is not working. o.k. its nice. I have my own simple system for EOD basis. It gives me good consistent results so far. Only on curiosity i given earlier messages to you to see that system. I am very much comfortable with my own system it was prepared by me after so many years struggle in the market and i have no need other system. I know no system and no single afl give success, only trader performance( System + money management + emotional management ) counts. Thanks
Yes, brother, its UR sweat system, dnt share if u dnt like. U have absolute rights to share it or not.
 

sahil79

Active Member
#90
Dear Zultan,

Link is not working. o.k. its nice. I have my own simple system for EOD basis. It gives me good consistent results so far. Only on curiosity i given earlier messages to you to see that system. I am very much comfortable with my own system it was prepared by me after so many years struggle in the market and i have no need other system. I know no system and no single afl give success, only trader performance( System + money management + emotional management ) counts. Thanks
Vijay sir, can u please share your eod system mentioned here, with us?
regards
 

Similar threads