Snap Shot of a New AFL-- "No Trade Zone"-Does any body Have it?

Please post the AFL, asnavale ji can be requested to help in the matter.
either post here or upload on 4shared.com
bye

Here is the screenshot of the AFL

vidyasagar

Very close to (sorry)

After all

you are close too

Hi frends

This system is similar to HVMM or uts SYSTEM.
http://www.youtube.com/watch?v=BBrkNoAA4y0#

http://www.youtube.com/watch?v=yC2R6MqXAv4&feature=related
UTS

http://www.youtube.com/watch?v=y5gUkq94dCk&feature=related
THE concept is using a moving average hi-lo envelope,a linear regr line for long term trend. you can overlap another moving average envelope with a lower fibonacci ma hi-lo

Well that is starting point. colorfill etc can be usedfor decoration
rvlv

Yes Thanx,

can U post the bottom pane AFL too, I have this AFL, but it does not plot they way it is plotetd in image.

Instead of BB, there are two line (dotted), there are the crux, when close above upper dotted line with Green candle is buy
and
Close below the dotted line with Red candle is short.

In between these two dotted line is no\ trade zone.

There is a wide band, the dotted line at center of Band depicts the trend, its also important.

thanx for ur findings, but still.....more to be added. bye

Sooner or later, it will be available for all, like ZULTAN ji did for all,

CAn u post the AFL plz?

I find this quote of a per son on ManshiRT Group, he claims about DLL code of the ETP
it is:

"Quote"
Dear Abhimanyu,

I JOINED THIS GROUP TODAY ONLY BUY SOME REFRENCES AND WHEN I WAS GOING THROUGH YOUR ETP POSTS AND ONE IMAGE FOUND AT PHOTO SECTION OF THIS GROUP I FOUND IT AS A COPY. I REQUEST MR.MODERATOR OF THIS GROUP TO PASS THIS MSG IF YOU REALLY WANT YOU MEMBER TO FIND TRUTH.

first of all i do not mind you selling this but i only concern that u r telling it's your more then years of hard work . your ETP 1.1 signal part is a DIRECT PORTING OF Mr. KARTHIK MARAR's KBRAIN VERSION 1.1 WHICH YOU HAVE WRAPPED IN DLL.. here is the part you wrapped in DLL

{
if (value2 < x2 AND abs(Close -Close[i- 2]) > range1)
p = 1 ;
else
{
if (value2 > x1 AND abs(Close -Close[i- 2]) > Range1)
p = 2 ;

else

p=0;
}
}

if ((value2 < x2 AND p == 1) OR (value2 < x2 AND p == 0))

{
if (abs(Close -Close[i- 2]) > Range1)
{
Plot1=H ;
Plot2=L ;
}
else
{
Plot1=Plot1[ i-1];
Plot2=Plot2[ i-1];
}
}
else
{
if ((value2 > x1 AND p == 2) OR (value2 > x1 AND p == 0))

{
Plot1=L ;
Plot2=H ;
}
else
{
Plot1=Plot1[ i-1];
Plot2=Plot2[ i-1];
}
}
//========== ========KBrain Signal ============ ========= ========= ======
{
if (value2 < x2 AND (abs(Close -Close[i- 2]) > Range1))
{
if (p == 1 OR p == 0)
Value3=L[ i]-range3[ i];
val1=Value3[ i];
p=1;
temp=1;
}
else
{
temp=temp[ i-1];
}
{
if (value2 > x1 AND (abs(Close -Close[i- 2]) > Range1))
{
if (p == 2 OR p == 0)
Value3=H[ i]+range3[ i];
val2=Value3[ i];
p=2;
temp=2;;
}

}
}
{

if (temp==1 AND Plot1>0 AND tm != 1)
tm= 1;

if (temp==2 AND Plot2>0 AND tm != 2)
tm=2;

}
//========== ========= ========= ===stop== ========= ========= ========= ========= ==
{
if (value2 < x2 AND (abs(Close -Close[i- 2]) > Range1)AND p !=2)

{
value3=L[ i]-range3[ i];
va1=Value3[ i];
p1=2;
r=Va1;
bstop=Va1[ i];
bt2=bt2[i- 1];
}

if (value2 > x1 AND (abs(Close -Close[i- 2]) > Range1)AND p !=1)

{
Value3=H[ i]+range3[ i];
va2=Value3[ i];
p1=1;

r=Va2;
sstop=Value3[ i];
bt1=bt1[i- 1];
}

}

if (val1 == 0 AND val2 == 0 AND p == 0 )
{
bstop=bstop[ i-1];
sstop=sstop[ i-1];
}


if (bstop<bstop[ i-1] AND tm==1 AND tm[i-1]==1) bstop=bstop[ i-1];
if (sstop>sstop[ i-1] AND tm==2 AND tm[i-1]==2) sstop=sstop[ i-1];

}

I AM MORE SURPRISHED AS YOU EVEN DID NOT TAKE CARE OF RENAMING THE REFRESENCES OF ORIGINAL AFL BY Mr.MARAR. .YOU just addedd boilanger band and KELTNER channel with some smothing on it. as it looks. ok i appriciate your addition as it's good but do not tell that ETP is totally your own work and you designed it from scratch. even i seen some ETP 2.0 pics also and it has VIKRAM'S FLOOR PIVOT SYSTEM FOR INTRADAY.

IF I AM WRONG IN ANY OF MY WORD THEN PROVE IT . I WILL BUY YOUR SYSTEM OR ELSE YOU ARE GOING TO MAKE IT FREE.

REGARDS,
XENONVIDEO
UnQuote

Dear Zultan does this code be helpful? for the experts?

Hi

The basic afl behind this indeed Kbrain. Some envelope has been added that is all. I was aware that abimanyu was working on making a dll of a tweaked version of Kbrain.

regards

Thanx Karthik for exposing the facts and truth .

Actually these ppl don’t know ABCD of programming so they just copy code from here to there or refer some body’s code and pretend like developers .... apart from all they took free training free software and when they came to know that they will not get ETP freely They abused me and my efforts .....

But these ppl wasted all of my efforts which I was doing for my bread-butter and for their Cake-n- ice-cream
But they destroyed all - just for time pass, or to satisfy their ego or just to avoid expenditure 4000/- per month when and where chance to learn then to earn then to buy after making profit was given to them.
All these culprits are Indian ppl... today I feel it would have gone better if was not born as Indian.....

Ss per our email-discussion any traditional trading system can not do all of these things which ETP can . Karthik I guess u know and u will also accept that similar logic with more or less difference can be developed by many or any developer.
Many other Trading systems might have same indicators like me..... But the purpose and how to use it to decide – When not to trade is important. These ppl have disassembled all and collected nuts and bolts but they don’t know how to design a car and then to drive it.

Its all logic that we make ....
There is some difference between Kbrain and my code :
There is one unused Function in Kbrain AFL in my code it is not there...and even some more lines but let these so called intelligent ppl find that Here I am just giving that function which my code don't have.

function PercentR( periods )
{
return -100 * ( HHV( H, periods ) - C )/( HHV( H, periods ) - LLV( L, periods ) );
}


The above given code ( Function) is still active inside the Kbrain AFL all over internet but it is not being called or used any where in Kbrain AFL

To the best of my knowledge or if am not wrong - If we comment or even delete function PercentR Kbrain AFL still works as formula of this function is already taken at initial stage with -

R = ((HHV(H,period) - C) /(HHV (H,period) -LLV (L,period))) *-100;


These ppl just referred Kbrain code to blame and abuse me and to prove that they are more intelligent but really they don’t know ABCD of coding . if u ask these ppl why -100 is used in this formula and why not 100 or 200 is used ? I guess 50% ppl will not be able to answer and rest of them will start to search on net to find answer !!


ETP still has many hidden things which are still undocumented and not given clearly and properly but purposely ... and I am sure that u know why it is not fully documented .
People who were actively participated in doing dissection of ETP are still crying that I have not given any thing clearly on Entry-EXIT ..... :lol:
Buy / Sell signal can be generated with any crossover of average and ATR. i’ll replace all the signal logic of ETP but it will take time.
Once again thanx for exposing fact and truth ..... but I know they will not shut their mouth ..... as they don’t have daring to admit and accept their mistakes.


Regards
Abhimanyu, Developer and Owner of EazyTradePlus (ETP)

"can U post the bottom pane AFL "
i did it's in Attached

pkgmtnl
any way check this link

4U

, if you don't like what you see .... i have got you Request



thanks to the Invisible Man for making one brother HAPPY