peak n trough trading system

ford7k · Dec 25, 2011

hi friends
see this
tell me how to use this
regards
ford

//trading system
//does not show chart on 4hr chart
SetChartBkColor(64);
//===================================

PctVlt=(ATR(14)/C)*100;//PercentVolatility

PK=IIf(PctVlt<0.5,Peak(Close,0.5,1),
IIf( PctVlt>=0.5 AND PctVlt< 1.0 ,Peak(Close,0.70,1),
IIf( PctVlt>=1.0 AND PctVlt< 1.5 ,Peak(Close,0.90,1),
IIf( PctVlt>=1.5 AND PctVlt< 2.0 ,Peak(Close,1.10,1),
IIf( PctVlt>=2.0 AND PctVlt< 2.5 ,Peak(Close,1.30,1),
IIf( PctVlt>=2.5 AND PctVlt< 3.0 ,Peak(Close,1.50,1),
IIf( PctVlt>=3.0 AND PctVlt< 3.5 ,Peak(Close,1.70,1),
IIf( PctVlt>=3.5 AND PctVlt< 4.0 ,Peak(Close,2.00,1),
Peak(Close,2.20,1) ))))))));

TGH=IIf(PctVlt<0.5,Trough(Close,0.5,1),
IIf( PctVlt>=0.5 AND PctVlt< 1.0 ,Trough(Close,0.75,1),
IIf( PctVlt>=1.0 AND PctVlt< 1.5 ,Trough(Close,1.00,1),
IIf( PctVlt>=1.5 AND PctVlt< 2.0 ,Trough(Close,1.25,1),
IIf( PctVlt>=2.0 AND PctVlt< 2.5 ,Trough(Close,1.50,1),
IIf( PctVlt>=2.5 AND PctVlt< 3.0 ,Trough(Close,1.75,1),
IIf( PctVlt>=3.0 AND PctVlt< 3.5 ,Trough(Close,2.00,1),
IIf( PctVlt>=3.5 AND PctVlt< 4.0 ,Trough(Close,2.25,1),
Trough(Close,2.50,1) ))))))));

Sens=IIf(PctVlt<0.5,0.5,
IIf( PctVlt>=0.5 AND PctVlt< 1.0 ,0.75,
IIf( PctVlt>=1.0 AND PctVlt< 1.5 ,1.00,
IIf( PctVlt>=1.5 AND PctVlt< 2.0 ,1.25,
IIf( PctVlt>=2.0 AND PctVlt< 2.5 ,1.50,
IIf( PctVlt>=2.5 AND PctVlt< 3.0 ,1.75,
IIf( PctVlt>=3.0 AND PctVlt< 3.5 ,2.00,
IIf( PctVlt>=3.5 AND PctVlt< 4.0 ,2.25,
2.50 ))))))));

Color=IIf(BarsSince(Cross(C,Ref(PK,-1)))<BarsSince(Cross(Ref(TGH,-1),C)),colorBrightGreen,colorRed);
Plot(C,"Chaloke.com Peak-Trough",Color,styleCandle);

///////////////////////////////////////////////////////////////////////////////////////////////////////////

DayH = TimeFrameGetPrice("H", inDaily, -1); DayHI = LastValue (DayH,1);// yesterdays high
DayL = TimeFrameGetPrice("L", inDaily, -1); DayLI = LastValue (DayL,1); // yesterdays low
DayC = TimeFrameGetPrice("C", inDaily, -1); // yesterdays close
DayO = TimeFrameGetPrice("O", inDaily); // current day open
DayH2= TimeFrameGetPrice("H", inDaily, -2); DayH2I = LastValue (DayH2,1); // Two days before high
DayL2= TimeFrameGetPrice("L", inDaily, -2); DayL2I = LastValue (DayL2,1); // Two days before low
DayH3= TimeFrameGetPrice("H", inDaily, -3); DayH3I = LastValue (DayH3,1); // Three days before high
DayL3= TimeFrameGetPrice("L", inDaily, -3); DayL3I = LastValue (DayL3,1); // Three days before low

numbars = LastValue(Cum(Status("barvisible")));
hts = -33.5;

YHL = ParamToggle("Yesterday HI LO","Show|Hide",1);
if(YHL==1) {
Plot(DayL,"YL",colorTurquoise,styleNoLine|styleNoLine|styleNoRescale|styleNoTitle);
Plot(DayH,"YH",colorTurquoise,styleNoLine|styleNoLine|styleNoRescale|styleNoTitle);
PlotText(" YH " , LastValue(BarIndex())-(numbars/Hts), DayHI, colorTurquoise);
PlotText(" YL " , LastValue(BarIndex())-(numbars/Hts), DayLI, colorTurquoise);
}

TDBHL = ParamToggle("2/3Days before HI LO","Show|Hide",0);
if(TDBHL==1) {

}

// Pivot Levels //
PP = (DayL + DayH + DayC)/3; PPI = LastValue (PP,1); // Pivot
R1 = (PP * 2) - DayL; R1I = LastValue (R1,1); // Resistance 1
S1 = (PP * 2) - DayH; S1I = LastValue (S1,1); // Support 1
R2 = PP + R1 - S1; R2I = LastValue (R2,1); // Resistance 2
S2 = PP - R1 + S1; S2I = LastValue (S2,1); // Support 2
R3 = PP + R2 - S1; R3I = LastValue (R3,1); // Resistance 3
S3 = PP - R2 + S1; S3I = LastValue (S3,1); // Support 3

ppl = ParamToggle("Pivot Levels","Show|Hide",1);
if(ppl==1) {
Plot(PP, "PP",colorYellow,styleNoLine|styleNoLine|styleNoRescale|styleNoTitle);

PlotText(" Pivot ", LastValue(BarIndex())-(numbars/Hts), PPI, colorYellow);

}
// Camerilla Levels //

rg = (DayH - DayL);

H5=DayC+1.1*rg; H5I = LastValue (H5,1);
H4=DayC+1.1*rg/2; H4I = LastValue (H4,1);
H3=DayC+1.1*rg/4; H3I = LastValue (H3,1);
H2=DayC+1.1*rg/6; H2I = LastValue (H2,1);
H1=DayC+1.1*rg/12; H1I = LastValue (H1,1);
L1=DayC-1.1*rg/12; L1I = LastValue (L1,1);
L2=DayC-1.1*rg/6; L2I = LastValue (L2,1);
L3=DayC-1.1*rg/4; L3I = LastValue (L3,1);
L4=DayC-1.1*rg/2; L4I = LastValue (L4,1);
L5=DayC-1.1*rg; L5I = LastValue (L5,1);

pcl = ParamToggle("Camerilla Levels","Show|Hide",0);
if(pcl==1) {
Plot(H5,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(H4,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(H3,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(H2,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(H1,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(L1,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(L2,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(L3,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(L4,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
Plot(L5,"",colorRose,styleDots|styleNoLine|styleNoRescale|styleNoTitle);
PlotText(" H5 = " , LastValue(BarIndex())-(numbars/Hts), H5I +0.05, colorRose);
PlotText(" H4 = " , LastValue(BarIndex())-(numbars/Hts), H4I +0.05, colorRose);
PlotText(" H3 = " , LastValue(BarIndex())-(numbars/Hts), H3I +0.05, colorRose);
PlotText(" H2 = " , LastValue(BarIndex())-(numbars/Hts), H2I +0.05, colorRose);
PlotText(" H1 = " , LastValue(BarIndex())-(numbars/Hts), H1I +0.05, colorRose);
PlotText(" L1 = " , LastValue(BarIndex())-(numbars/Hts), L1I +0.05, colorRose);
PlotText(" L2 = " , LastValue(BarIndex())-(numbars/Hts), L2I +0.05, colorRose);
PlotText(" L3 = " , LastValue(BarIndex())-(numbars/Hts), L3I +0.05, colorRose);
PlotText(" L4 = " , LastValue(BarIndex())-(numbars/Hts), L4I +0.05, colorRose);
PlotText(" L5 = " , LastValue(BarIndex())-(numbars/Hts), L5I +0.05, colorRose);
}

// Current Days Hi Lo //
THL = ParamToggle("Todays Hi Lo","Show|Hide",1);
if(THL==1) {
isRth = TimeNum() >= 084500 & TimeNum() <= 085959;
isdRth = TimeNum() >= 084500 & TimeNum() <= 160000;
aRthL = IIf(isRth, L, 1000000);
aRthH = IIf(isdRth, H, Null);
aRthLd = IIf(isdRth, L, 1000000);
DayH = TimeFrameCompress( aRthH, inDaily, compressHigh );
DayH = TimeFrameExpand( DayH, inDaily, expandFirst );
DayL = TimeFrameCompress( aRthLd, inDaily, compressLow );
DayL = TimeFrameExpand( DayL, inDaily, expandFirst );
Bars = BarsSince(TimeNum() >= 94500 AND TimeNum() < 095959);//,BarIndex(),1); // AND DateNum()==LastValue(DateNum());
x0 = BarCount-LastValue(Bars);
x1 = BarCount-1;
DayHline=LineArray(x0,LastValue(DayH),x1,LastValue (DayH),0);
DayLline=LineArray(x0,LastValue(DayL),x1,LastValue (DayL),0);
DayHlineI = LastValue (DayHline,1);
DayLlineI = LastValue (DayLline,1);
Plot(DayHline,"DayHigh",colorYellow,styleNoLine|styleNoRescale|styleNoTitle);
Plot(DayLline,"DayLow",colorYellow,styleNoLine|styleNoRescale|styleNoTitle);
PlotText(" Day High " , LastValue(BarIndex())-(numbars/Hts), DayHlineI +0.05, colorYellow);
PlotText(" Day Low " , LastValue(BarIndex())-(numbars/Hts), DayLlineI +0.05, colorYellow);
}

///////////////////////////////////////////////////////////////////////////////////////////////////////////

//Support and resistance levels using RSI.
//graham Kavanagh May 2003
//Load into Indicator Builder
//Sensitivity of the levels can be changed with the variables
//Can test different numbers live with the Param function ctrl-R with open pane
RSIperiod = 5; // Param("RSI p",3,14,30,1);
Percent = 5; // Param("ZIG %",8,9,15,1);
EMAperiod = 5; //Param("EMA p",4,5,10,1);
HHVperiod = 5; //Param("HHV p",3,5,10,1);
NumLine = 1; //Param("Num Lines",3,1,20,1);

Base = DEMA(RSI(RSIperiod),EMAperiod);

for( i = 1; i <= numline; i++ )
{
ResBase = LastValue(Peak(Base,Percent,i));
SupBase = LastValue(Trough(Base,Percent,i));
Plot(ValueWhen( ResBase==Base, HHV(H,HHVperiod) ), "Resist Level", colorPink,
styleDots);
Plot(ValueWhen( supbase==Base, LLV(L,HHVperiod) ), "Support Level", colorBlue,
styleDots);
}
Title = Name() + "; " + Date() + ": Support & Resistance Levels using RSI: " +
/*EncodeColor(colorGreen)+ "Support Levels are Green; "+EncodeColor(colorRed)+
"Resistance Levels are Red: "+EncodeColor(colorBlack)+*/ "Num lines
="+WriteVal(numline,1) ;

/////////////////////////////////////////////////////////////////////////////////////////////////
///// Trailing Stop Module /////

P6=Param("Trailing Stop Risk",2.5,2,3.5,0.1);
P7=Param("Trailing Stop LookBack",14,5,25,1);
P8=Param("Trailing Stop PrevLow Switch",0,0,1,1);
PrevLow=IIf(P8==1, Ref(C,-TroughBars(C,5,1)) ,Null);
Plot(PrevLow,"",colorRed);

//Position sizing//
MyTotalPort = Param("MyTotalPort",1000000,10000,10000000,100000);
AcceptableRisk = Param("AcceptableRisk",0.5,0.1,3,0.1);
BarsFromStart = BarsSince(Cross(C,Ref(PK,-1))AND Ref(Color,-1)==colorRed) ;
InitialStopLoss =Ref( H - P6*ATR(P7),-BarsFromStart);
PositionSizing = 0.01*AcceptableRisk*MyTotalPort/( C - InitialStopLoss );

Plot(IIf( HHV(H - P6*ATR(P7),BarsFromStart+1) <C ,HHV(H - P6*ATR(P7),BarsFromStart+1),Null) ,"",colorCustom12,1);

PlotShapes(shapeDownArrow*Cross(Ref(HHV(H - P6*ATR(P7),BarsFromStart+1),-1),C),colorBlack,0,H,Offset=-43);

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

SetChartOptions(0,chartShowArrows|chartShowDates);
_N(Title =EncodeColor(colorBrightGreen)+ StrFormat("{{NAME}} - {{INTERVAL}} - {{DATE}} - "+ EncodeColor(colorYellow)+"Open = "+ EncodeColor(colorYellow) +"%g "+ EncodeColor(colorBrightGreen)+"High = "+ EncodeColor(colorBrightGreen) +"%g - "+ EncodeColor(colorRed)+"Low = "+ EncodeColor(colorRed) +"%g "+ EncodeColor(colorYellow) +"Close = "+ EncodeColor(colorYellow) +" %g &nbs p; ; (%.1f%%) Vol " +WriteVal( V, 1.0 ) +" {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 )) ));
" - " + Date() +" - ";
////////////////////////////////////////////////////////////////////////////////////////////////

Odd=13;//enter Odd numbers only
CoefOdd=round(Odd/2);

Even=12;//enter Even numbers only
Coefeven=Even/2;
Coefeven2=Coefeven+1;

CongestionPercent=2.8;/*Set % above/below Moving average for congestion / sideways market*/

TriangularOdd=MA(MA(C,CoefOdd),CoefOdd);
TriangularEven=MA(MA(C,Coefeven),Coefeven2);

finalMov_avg=IIf(Odd > even,triangularOdd,TriangularEven);

Color=colorBrightGreen;//select Moving average line color
tickercolor=colorBlack;//select price color

Plot(finalMov_avg,"",IIf(C < finalmov_avg,colorRed,Color),styleDots|styleThick);

////////////////////////////////////////////////////////////////////////////////////////////////

/* **********************************

Code to automatically identify pivots TRIANGLE

********************************** */
// -- what will be our lookback range for the hh and ll?
farback=Param("How Far back to go",200,12,30,1);
nBars = Param("Number of bars", 25, 1, 30, 1);
// -- Create 0-initialized arrays the size of barcount
aHPivs = H - H;
aLPivs = L - L;
// -- More for future use, not necessary for basic plotting
aHPivHighs = H - H;
aLPivLows = L - L;
aHPivIdxs = H - H;
aLPivIdxs = L - L;
nHPivs = 0;
nLPivs = 0;
lastHPIdx = 0;
lastLPIdx = 0;
lastHPH = 0;
lastLPL = 0;
curPivBarIdx = 0;
// -- looking back from the current bar, how many bars
// back were the hhv and llv values of the previous
// n bars, etc.?
aHHVBars = HHVBars(H, nBars);
aLLVBars = LLVBars(L, nBars);
aHHV = HHV(H, nBars);
aLLV = LLV(L, nBars);
// -- Would like to set this up so pivots are calculated back from
// last visible bar to make it easy to "go back" and see the pivots
// this code would find. However, the first instance of
// _Trace output will show a value of 0
aVisBars = Status("barvisible");
nLastVisBar = LastValue(Highest(IIf(aVisBars, BarIndex(), 0)));
_TRACE("Last visible bar: " + nLastVisBar);
// -- Initialize value of curTrend
curBar = (BarCount-1);
curTrend = "";
if (aLLVBars[curBar] <
aHHVBars[curBar]) {
curTrend = "D";
}
else {
curTrend = "U";
}
// -- Loop through bars. Search for
// entirely array-based approach
// in future version
for (i=0; i<farback; i++) {
curBar = (BarCount - 1) - i;
// -- Have we identified a pivot? If trend is down...
if (aLLVBars[curBar] < aHHVBars[curBar]) {
// ... and had been up, this is a trend change
if (curTrend == "U") {
curTrend = "D";
// -- Capture pivot information
curPivBarIdx = curBar - aLLVBars[curBar];
aLPivs[curPivBarIdx] = 1;
aLPivLows[nLPivs] = L[curPivBarIdx];
aLPivIdxs[nLPivs] = curPivBarIdx;
nLPivs++;
}
// -- or current trend is up
} else {
if (curTrend == "D") {
curTrend = "U";
curPivBarIdx = curBar - aHHVBars[curBar];
aHPivs[curPivBarIdx] = 1;
aHPivHighs[nHPivs] = H[curPivBarIdx];
aHPivIdxs[nHPivs] = curPivBarIdx;
nHPivs++;
}
// -- If curTrend is up...else...
}
// -- loop through bars
}
// -- Basic attempt to add a pivot this logic may have missed
// -- OK, now I want to look at last two pivots. If the most
// recent low pivot is after the last high, I could
// still have a high pivot that I didn't catch
// -- Start at last bar
curBar = (BarCount-1);
candIdx = 0;
candPrc = 0;
lastLPIdx = aLPivIdxs[0];
lastLPL = aLPivLows[0];
lastHPIdx = aHPivIdxs[0];
lastHPH = aHPivHighs[0];
if (lastLPIdx > lastHPIdx) {
// -- Bar and price info for candidate pivot
candIdx = curBar - aHHVBars[curBar];
candPrc = aHHV[curBar];
if (
lastHPH < candPrc AND
candIdx > lastLPIdx AND
candIdx < curBar) {
// -- OK, we'll add this as a pivot...
aHPivs[candIdx] = 1;
// ...and then rearrange elements in the
// pivot information arrays
for (j=0; j<nHPivs; j++) {
aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-
(j+1)];
aHPivIdxs[nHPivs-j] = aHPivIdxs[nHPivs-(j+1)];
}
aHPivHighs[0] = candPrc ;
aHPivIdxs[0] = candIdx;
nHPivs++;
}
} else {
// -- Bar and price info for candidate pivot
candIdx = curBar - aLLVBars[curBar];
candPrc = aLLV[curBar];
if (
lastLPL > candPrc AND
candIdx > lastHPIdx AND
candIdx < curBar) {
// -- OK, we'll add this as a pivot...
aLPivs[candIdx] = 1;
// ...and then rearrange elements in the
// pivot information arrays
for (j=0; j<nLPivs; j++) {
aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
}
aLPivLows[0] = candPrc;
aLPivIdxs[0] = candIdx;
nLPivs++;
}
}
// -- Dump inventory of high pivots for debugging
/*
for (k=0; k<nHPivs; k++) {
_TRACE("High pivot no. " + k
+ " at barindex: " + aHPivIdxs[k] + ", "
+ WriteVal(ValueWhen(BarIndex()==aHPivIdxs[k],
DateTime(), 1), formatDateTime)
+ ", " + aHPivHighs[k]);
}
*/
// -- OK, let's plot the pivots using arrows

PlotShapes(IIf(aHPivs==1, shapeSmallDownTriangle, shapeNone), colorCustom12, 0, High, Offset=-5);
PlotShapes(IIf(aLPivs==1, shapeSmallUpTriangle , shapeNone), colorCustom11, 0, Low, Offset=-5);

Sell = aHPivs == 1 ;
Buy = aLPivs == 1 ;
Filter=Buy OR Sell;
Sell=ExRem(Sell,Buy);
Buy=ExRem(Buy,Sell);

////////////////////////////////////////////////////////////////////////////////////////////

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

messageboard = ParamToggle("Message Board","Show|Hide",0);
showsl = ParamToggle("Stop Loss Line", "Show|Hide", 0);
no=10;
res=HHV(H,no);
sup=LLV(L,no);
avd=IIf(C>Ref(res,-1),1,IIf(C<Ref(sup,-1),-1,0));
avn=ValueWhen(avd!=0,avd,1);
s5d=IIf(avn==1,sup,res);

if (showsl == 0)
//{Plot(s5d,"Stop Loss",colorCustom14,styleDots);}

exitlong = Cross(s5d, H);

exitshort = Cross(L, s5d);

Buy = exitshort;
Sell = exitlong;
//Short = Sell;
//Cover = Buy;
Buy = ExRem(Buy,Sell);
Sell = ExRem(Sell,Buy);
//Short = ExRem(Short, Cover);
//Cover = ExRem(Cover, Short);
AlertIf( Buy, "", "BUY @ " + C, 1 );
AlertIf( Sell, "", "SELL @ " + C, 2 );

for(i=BarCount-1;i>1;i--)
{
if(Buy == 1)
{
entry = C;
sig = "BUY";
sl = s5d;
tar1 = entry + (entry * .0056);
tar2 = entry + (entry * .0116);
tar3 = entry + (entry * .0216);

bars = i;
i = 0;
}
if(Sell == 1)
{
sig = "SELL";
entry = C;
sl = s5d;
tar1 = entry - (entry * .0056);
tar2 = entry - (entry * .0116);
tar3 = entry - (entry * .0216);

bars = i;
i = 0;
}
}
Offset = 20;
Clr = IIf(sig == "BUY", colorGreen, colorRed);
ssl = IIf(bars == BarCount-1, s5d[BarCount-1], Ref(s5d, -1));
sl = ssl[BarCount-1];

Plot(LineArray(bars-Offset, sl, BarCount, sl,1), "", colorDarkRed, styleLine|styleDots, Null, Null, Offset);

for (i=bars; i <BarCount;i++)
{

}

printf("Last " + sig + " Signal came " + (BarCount-bars) + " bars ago");
printf("\n" + sig + " @ : " + entry + "\nStop Loss : " + sl + " (" + WriteVal(IIf(sig == "SELL",entry-sl,sl-entry), 2.2) + ")"+ "\nTarget_1 : " + tar1 + "\nTarget_2 : " + tar2 + "\nTarget_3 : " + tar3);
printf("\nCurrent P/L : " + WriteVal(IIf(sig == "BUY",(C-entry),(entry-C)),2.2));

if (messageboard == 0 )
{
GfxSelectFont( "Tahoma", 13, 100 );
GfxSetBkMode( 1 );
GfxSetTextColor( colorWhite );

if ( sig =="BUY")
{
GfxSelectSolidBrush( colorBlue ); // this is the box background color
}
else
{
GfxSelectSolidBrush( colorRed ); // this is the box background color
}
pxHeight = Status( "pxchartheight" ) ;
xx = Status( "pxchartwidth");
Left = 1100;
width = 310;
x = 5;
x2 = 290;

y = pxHeight;

GfxSelectPen( colorGreen, 1); // broader color
GfxRoundRect( x, y - 200, x2, y , 129, 129 ) ;
GfxTextOut( ( " Chaloke Peak N Trough System* "),32,y-185);
GfxTextOut( (" "),27,y-160);
GfxTextOut( ("Last " + sig + " Signal came " + (BarCount-bars-1) * Interval()/60 + " mins ago"), 18, y-160) ; // The text format location
GfxTextOut( ("" + WriteIf(sig =="BUY",sig + " @ ",sig + " @") + " : " + entry), 18, y-140);
GfxTextOut( ("Trailing SL : " + sl + " (" + WriteVal(IIf(sig == "SELL",entry-sl,sl-entry), 2.2) + ")"), 18, y-120);
GfxTextOut( ("TGT:1 : " + tar1), 18, y -100);
GfxTextOut( ("TGT:2 : " + tar2), 18,y-80);
GfxTextOut( ("TGT:3 : " + tar3), 18,y-60);
GfxTextOut( ("Current P/L : " + WriteVal(IIf(sig == "BUY",(C-entry),(entry-C)),2.2)), 88, y-42);;

}
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

_SECTION_BEGIN("Magnified Market Price");
//by Vidyasagar, [email protected]//
FS=Param("Font Size",30,30,100,1);
GfxSelectFont("Arial", FS, 900, italic = False, underline = False, True );
GfxSetBkMode( colorWhite );
GfxSetTextColor( ParamColor("Color",colorYellow) );
Hor=Param("Horizontal Position",400,400,400,400);
Ver=Param("Vertical Position",27,27,27,27);
GfxTextOut(""+C,Hor , Ver );
YC=TimeFrameGetPrice("C",inDaily,-1);
DD=Prec(C-YC,2);
xx=Prec((DD/YC)*100,2);
GfxSelectFont("Arial", 12, 700, italic = False, underline = False, True );
GfxSetBkMode( colorWhite );
GfxSetTextColor(ParamColor("Color",colorYellow) );
GfxTextOut(""+DD+" ("+xx+"%)", Hor+5, Ver+45 );
_SECTION_END();

////////////////////////////////////////////////////////////////////////////////

_SECTION_BEGIN("trending ribbon");
uptrend=PDI()>MDI()AND Signal()<MACD();
downtrend=MDI()>PDI()AND Signal()>MACD();
Plot( 2, /* defines the height of the ribbon in percent of pane width */"ribbon",
IIf( uptrend, colorGreen, IIf( downtrend, colorRed, colorPink )), /* choose color */
styleOwnScale|styleArea|styleNoLabel, -0.5, 100 );
_SECTION_END();
GraphXSpace=15;

//////////////////////////////////////////////////////////////////////////////

shaileshbpatel · Dec 25, 2011

Excellent Very nice afl... thanks bro...
See image...

jitensingh · Dec 25, 2011

It is showing error pls correct error error 29

rsuresh13 · Dec 25, 2011

lot of errors

anandmurale · Dec 25, 2011

no error in tht afl woking perfectly. If error just buzz in mkt hrs. anandmurale yahoo id

Shailu · Dec 25, 2011

enough error.

wahabdeen · Dec 25, 2011

Very nice afl

last-air-bender · Dec 25, 2011

The afls for the system can be downloaded from the following link (Credit goes to ford7k only)

http://www.2shared.com/file/9D7ekHzs/Formulas.html

abk717 · Dec 26, 2011

Very nice afl

mani55502 · Feb 23, 2012

Very nice afl

Thread starter	Similar threads	Forum	Replies	Date
K	Peak and trough Amibroker AFL	AmiBroker	0	Dec 31, 2016
I	peaks and Trough by loop	AmiBroker	0	Mar 25, 2016
R	Line Arrays from Past Peaks and Troughs	AmiBroker	16	Feb 14, 2015
	Peak Trough Help	AmiBroker	0	Dec 2, 2014
G	Help to identify peak and trough in a indicator	AmiBroker	24	Feb 12, 2013

peak n trough trading system

ford7k

Banned

shaileshbpatel

Member

jitensingh

Active Member

rsuresh13

New Member

anandmurale

New Member

Shailu

Active Member

wahabdeen

Member

last-air-bender

Member

abk717

New Member

mani55502

New Member

Similar threads