Distance Measurement

manojborle

Well-Known Member
#1
Dear Experts

I was reading Demark's book for TD Lines and TD Points.
Here he mentions TD Price Projector which requires distance to be measured from Highest high/Lowest Low to TD line.

How can we do this in amibroker where it will give us the choice to select any 2 points vertically and then display the distance between them ?

Thanks in advance...
 

amitrandive

Well-Known Member
#3
Try this

Identifies overbought and oversold conditions for 14 indicators

MACD,RSI,CCI,StochK,StochD,Money Flow Index,Ultimate,ROC(Close),Tom DeMark,ARSI,ProjOsc,DMI,StdevOsc,DeMarker

mostly in range of 0-100 that we use along with price charts n that execute our trade n along with these indicators i also put support n resistace zones for comfort of a trader namely trendlines, Fibonacc lines n standard deviation line
plus overbought n oversold zone(custom) in clouded area
plotted by – ankit dargan
*/

_SECTION_BEGIN(“14 Oversold n Overbought indicators with Support n Resistance”);
SetChartBkColor( colorGrey40 ) ;
SetChartOptions(0,0,ChartGrid30 | ChartGrid70 );

Pds=Param(“Period”,14,7,33,1);
Ob=Param(“overbought”,70,-200,200,5);
Os=Param(“oversold”,30,-200,200,5);

/****Dimitri Code***********/
/*14-Day RSI of MACD()*/
//t=14; Replaced with pds= statement
Var=MACD();
Up=IIf(Var>Ref(Var,-1),abs(Var-Ref(Var,-1)),0);
Dn=IIf(Var<Ref(Var,-1),abs(Var-Ref(Var,-1)),0);
Ut=Wilders(Up,Pds);
Dt=Wilders(Dn,Pds);
RSIt=100*(Ut/(Ut+Dt));
/************End Code*************************/

/****Tom DeMark’s Range Expansion Index***********/
HighMom = H – Ref( H, -2 );
LowMom = L – Ref( L, -2 );
Cond1 = ( H >= Ref( L,-5) OR H >= Ref( L, -6 ) );
Cond2 = ( Ref( H, -2 ) >= Ref( C, -7 ) OR Ref( H, -2 ) >= Ref( C, -8 ) );
Cond3 = ( L Cond4 = ( Ref( L, -2 ) Cond = ( Cond1 OR Cond2 ) AND ( Cond3 OR Cond4 );
Num = IIf( Cond, HighMom + LowMom, 0 );
Den = abs( HighMom ) + abs( LowMom );
TDREI = 100 * Sum( Num, 5 )/Sum( Den, 5 ) ;
/************End Code*************************/

/****Tom DeMark’s DeMarker***********/

highm = IIf( H > Ref( H, -1 ), H – Ref( H, – 1), 0 );
lowm = IIf( L < Ref( L, -1 ), Ref( L, – 1 ) – L, 0 );

DeMarker = 100 * Sum( highm, 13 )/( Sum( lowm, 13 ) + Sum( highm, 13 ) );

/****ARSI formula***********/
// variable period version (backtest-safe)
Chg = C – Ref( C, -1 );
UpCount = Sum( Chg >= 0, Pds );
DnCount = Pds – UpCount;
UpMove = AMA( Max( Chg, 0 ), 1/UpCount );
DnMove = AMA( Max( -Chg, 0 ), 1/DnCount );
RS = UpMove/DnMove;
ARSI = 100-(100/(1+RS));
/************End Code*************************/

/****Projection Oscillator***********/

function ProjOsc(Pds) {

// Slope of High {n period regression line of High)}
SlopeHigh = ((Pds * (Sum( Cum(1) * High, Pds))) – (Sum( Cum(1),Pds) * (
Sum(High, Pds)))) / ((Pds * Sum( Cum(1) ^ 2 , Pds)) – (Sum(Cum(1),Pds) ^
2));

//Slope of Low {n period regression line of Low}
SlopeLow = ((Pds * (Sum( Cum(1) * Low, Pds))) – (Sum( Cum(1), Pds) * (
Sum(Low, Pds)))) / ((Pds * Sum( Cum(1)^ 2, Pds)) – ( Sum(Cum(1),Pds) ^
2));

//Upper Projection Band
UpProjBand = 0;
for (i=0; i {
UpProjBand =
Max(Max(Ref(High,-i)+i*slopehigh,Ref(High,-i-1)+(i+1)*slopehigh),UpProjBand);
}

//Lower Projection Band
LoProjBand = 10000;
for (i=0; i {
LoProjBand =
Min(Min(Ref(Low,-i)+i*slopelow,Ref(Low,-i-1)+(i+1)*slopelow),LoProjBand);
}

//Projection Oscillator
ProOsc = 100 * (Close – LoProjBand) / (UpProjBand – LoProjBand);

return ProOsc;

}
aa= ProjOsc(Pds);
//bb= MA(ProjOsc(Pds),av);

//Plot(aa,”Projection Osc”,colorBrightGreen,styleLine);
//Plot(bb,”MA ProjOsc”,colorRed,styleLine);

/************End Code*************************/

/****Dynamic Momentum Index***********/

//period = Param( “RSI Period”, 13, 1, 100, 1 );
//MAperiod = Param( “MA Period”, 5, 1, 100, 1 );
//StDevperiod = Param( “StDev Period”, 8, 1, 100, 1 );

upday=IIf(C>Ref(C,-1),C-Ref(C,-1),0);
downday=IIf(Ref(C,-1)> C,Ref(C,-1)-C,0);

Stda=MA(StDev(C,8),5);//by default 5 is maperiod n 8 is stdevperiod
V1=StDev(C,8)/Stda;
TD=int(Pds/V1);

Su=Sum(upday,TD);
Sd=Sum(downday,TD);
M1=(Su-Sd);
M2=abs(Su+Sd);
DMI=50*(M1+M2)/M2;
//xs=Param(“Smoothing”,3,1,10,1);
//xs1=Param(“Trigger Line”,5,1,10,1);
//Plot(EMA(DMI,xs),”Dynamic Momentum Index “,colorRed,1);
//Plot(MA(DMI,xs1),”trigger”,colorBlue,1);

/************End Code*************************/

/****Stddev Oscillator***********/

StdevOsc=( ( C+2 * StDev( C,pds ) – MA( C,pds ) ) / ( 4 * StDev( C,pds ) ) ) * 100;

/************End Code*************************/

/*******Variables******************/

A1=RSIt; B2=RSI(pds); C3=CCI(pds); D4=StochK(pds); E5=StochD(pds);
F6=MFI(pds); G7=Ultimate(pds); H8=ROC(C,pds); I9=TDREI; J10=ARSI; K11=ProjOsc(Pds); L12= DMI; M13=StdevOsc ; N14 =DeMarker;//DO HERE

oc=ParamList(“Oscillator choice”,”RSI of MACD|RSI|CCI|StochK|StochD|Money Flow Index|Ultimate|ROC(Close)|Tom DeMark|ARSI|ProjOsc|DMI|StdevOsc|DeMarker”,1);
Osc=
IIf(oc==”RSI of MACD”,A1,
IIf(oc==”RSI”,B2,
IIf(oc==”CCI”,C3,
IIf(oc==”StochK”,D4,
IIf(oc==”StochD”,E5,
IIf(oc==”Money Flow Index”,F6,
IIf(oc==”Ultimate”,G7,
IIf(oc==”ROC(Close)”,H8,
IIf(oc==”Tom DeMark”,I9,
IIf(oc==”ARSI”,J10,
IIf(oc==”ProjOsc”,K11,
IIf(oc==”DMI”,L12,
IIf(oc==”StdevOsc”,M13,N14))))))))))))); // /*insert variable by Identifier*/
/*Value of Osc*/
Value1 = Osc;

Header=WriteIf(Osc==A1,” RSI Of MACD”,WriteIf(Osc==b2,” RSI”,WriteIf(Osc==C3,” CCI”,WriteIf(Osc==D4,”STOCHK”,WriteIf(Osc==E5,”STOCHD”,WriteIf(Osc==F6,” MONEY FLOW INDEX”,WriteIf(Osc==G7,” ULTIMATE”,WriteIf(Osc==H8,” ROC(CLOSE)”,WriteIf(Osc==I9,” Tom DeMark”,WriteIf(Osc==J10,” ARSI”,WriteIf(Osc==K11,” ProjOsc”,WriteIf(Osc==L12,” DMI”,WriteIf(Osc==M13,” StdevOsc”,WriteIf(Osc==N14,” DeMarker”,”"))))))))))))));//DO HERE

Plot(Value1, Header,6,1+4); /*BLUE*/

//Plot( Osc, “+Osc+”, colorBlack );
PlotOHLC( Osc,Osc,50,Osc, “”, IIf( Osc > 50, colorRed, colorGreen ), styleCloud | styleClipMinMax|styleNoLabel, Os, Ob );
Buy = Cross (Osc, Os);
Sell = Cross (Ob, Osc);
PlotShapes(Buy*shapeUpArrow,colorGreen);
PlotShapes(Sell*shapeDownArrow,colorRed);
Plot(Os,”",colorAqua,1+4);
Plot(Ob,”",colorPink,1+4);
_SECTION_END();
_SECTION_BEGIN(“SUPPORT/RESISTANCE”);

SelectedIndicator = ParamList( “SUPPORT/RESISTANCE”, “Trendlines_Wedge,fibo,STDDEVLNES”, 0);

_SECTION_BEGIN(“STDDEVLNES”);
Daysback = Param(“Period for Liner Regression Line”,21,1,44000,1);
shift = Param(“Look back period”,0,0,240,1);
LRColor = ParamColor(“LR Color”, colorRed );
SDP = Param(“Standard Deviation”, 1.3, 0, 13, 0.1);
SDColor = ParamColor(“SD Color”, colorYellow );
SDP2 = Param(“2d Standard Deviation”, 2.1, 0, 13, 0.1);
SDColor2 = ParamColor(“2 SD Color”, colorBrightGreen );
SDP3 = Param(“3d Standard Deviation”, 3.4, 0, 13, 0.1);
SDColor3 = ParamColor(“3 SD Color”, colorRed );
_SECTION_END();

switch ( SelectedIndicator )
{

case “STDDEVLNES”:
_SECTION_BEGIN(“STDDEVLNES”);

P = Value1;

// =============================== Math Formula =============================================================

x = BarIndex();
lastx = LastValue( x ) – shift;
aa = LastValue( Ref(LinRegIntercept( p, Daysback), -shift) );
bb = LastValue( Ref(LinRegSlope( p, Daysback ), -shift) );
y = Aa + bb * ( x – (Lastx – DaysBack +1 ) );

// ==================Plot the Linear Regression Line ==========================================================

LRLine = IIf( x > (lastx – Daysback) AND x < Lastx, y, Null );
Plot( LRLine , “LinReg”, LRCOLOR, styleLine+4 ); // styleDots );

// ========================== Plot 1st SD Channel ===============================================================

SD = SDP/2;

width = LastValue( Ref(SD*StDev(p, Daysback),-shift) ); // THIS IS WHERE THE WIDTH OF THE CHANELS IS SET
SDU = IIf( x > (lastx – Daysback) AND x < Lastx, y+width , Null ) ;
SDL = IIf( x > (lastx – Daysback) AND x < Lastx, y-width , Null ) ;

Plot( SDU , “Upper Lin Reg”, SDColor,styleLine );
Plot( SDL , “Lower Lin Reg”, SDColor,styleLine );

// ========================== Plot 2d SD Channel ===============================================================

SD2 = SDP2/2;

width2 = LastValue( Ref(SD2*StDev(p, Daysback),-shift) ); // THIS IS WHERE THE WIDTH OF THE CHANELS IS SET
SDU2 = IIf( x > (lastx – Daysback) AND x < Lastx, y+width2 , Null ) ;
SDL2 = IIf( x > (lastx – Daysback) AND x < Lastx, y-width2 , Null ) ;

Plot( SDU2 , “Upper Lin Reg”, SDColor2,styleLine );
Plot( SDL2 , “Lower Lin Reg”, SDColor2,styleLine );

// ========================== Plot 3d SD Channel ===============================================================

SD3 = SDP3/2;

width3 = LastValue( Ref(SD3*StDev(p, Daysback),-shift) ); // THIS IS WHERE THE WIDTH OF THE CHANELS IS SET
SDU3 = IIf( x > (lastx – Daysback) AND x < Lastx, y+width3 , Null ) ;
SDL3 = IIf( x > (lastx – Daysback) AND x < Lastx, y-width3 , Null ) ;

Plot( SDU3 , “Upper Lin Reg”, SDColor3,styleDashed+4 );
Plot( SDL3 , “Lower Lin Reg”, SDColor3,styleDashed+4 );

_SECTION_END();

break;

case “Trendlines_Wedge”:
_SECTION_BEGIN(“Trendlines_Wedge”);
G=0;// set G=1, 2, 3, … to see previous Resistance trendlines
GG=0;// set G=1, 2, 3, … to see previous Support trendlines
x = Cum(1);
per = 1;// sensitivity calibration
s1=Value1;s11=Value1;
pS = TroughBars( s1, per, 1 ) == 0;
endt= LastValue(ValueWhen( pS, x, 1+GG ));
startt=LastValue(ValueWhen( pS, x, 2+GG ));
dtS =endt-startt;
endS = LastValue(ValueWhen( pS, s1, 1+GG ) );
startS = LastValue( ValueWhen( pS, s1, 2+GG ));
aS = (endS-startS)/dtS;
bS = endS;
trendlineS = aS * ( x -endt ) + bS;// the Support trendline equation
Plot(IIf(x>startt-6 AND TRENDLINES>0 AND TRENDLINES0,5,4),8);
pR = PeakBars( s11, per, 1 ) == 0;
endt1= LastValue(ValueWhen( pR, x, 1+G ));
startt1=LastValue(ValueWhen( pR, x, 2+G ));
dtR =endt1-startt1;
endR = LastValue(ValueWhen( pR, s11, 1+G ) );
startR = LastValue( ValueWhen( pR, s11, 2 +G ));
aR = (endR-startR)/dtR;
bR = endR;
trendlineR = aR * ( x -endt1 ) + bR;// the Resistance trendline equation
Plot(IIf(x>startT1-6 AND TRENDLINER>0 AND TRENDLINER0,5,4),8);
Ascwedge=Ar>0.5 AND As>sqrt(2)*Ar AND trendlineR>trendlineS;
Descwedge= AsAr/sqrt(2) AND trendlineR>trendlineS;
_SECTION_END();
break;

case “fibo”:
_SECTION_BEGIN(“fibo”);
barvisible = Status(“barvisible”);
r = Value1;
maxr = LastValue( Highest( IIf( barvisible, r, 0 ) ) );
minr = LastValue( Lowest( IIf( barvisible, r, 100 ) ) );
ranr = maxr – minr;
Plot( maxr , “0%”, colorGrey50,styleDashed );
Plot( maxr – 0.236 * ranr, “-23.6%”, colorViolet,styleDashed+4 );
Plot( maxr – 0.382 * ranr, “-38.2%”, colorYellow,styleDashed );
Plot( maxr – 0.50 * ranr, “-50.0%”, colorOrange,styleDashed,styleDashed );
Plot( maxr – 0.618 * ranr, “-61.8%”, colorViolet,styleDashed+4 );
Plot( minr , “-100%”, colorGrey50,styleDashed );
GraphXSpace = 3;
_SECTION_END();

break;
}

_SECTION_END();
 

hmsanil

Active Member
#7
error free afl

Code:
/*These codes consist day to day 14 trading formulas namely

MACD,RSI,CCI,StochK,StochD,Money Flow Index,Ultimate,ROC(Close),Tom DeMark,ARSI,ProjOsc,DMI,StdevOsc,DeMarker

mostly in range of 0-100 that we use along with price charts n that execute our trade n along with these indicators i also put support n resistace zones for comfort of a trader namely trendlines, Fibonacc lines n standard deviation line
plus overbought n oversold zone(custom) in clouded area
plotted by - ankit dargan
*/  

_SECTION_BEGIN("14 Oversold n Overbought indicators with Support n Resistance");
SetChartBkColor( colorGrey40 ) ;
SetChartOptions(0,0,ChartGrid30 | ChartGrid70 ); 

Pds=Param("Period",14,7,33,1);
Ob=Param("overbought",70,-200,200,5);
Os=Param("oversold",30,-200,200,5);

/****Dimitri Code***********/
/*14-Day RSI of MACD()*/ 
//t=14; Replaced with pds= statement
Var=MACD(); 
Up=IIf(Var>Ref(Var,-1),abs(Var-Ref(Var,-1)),0); 
Dn=IIf(Var<Ref(Var,-1),abs(Var-Ref(Var,-1)),0); 
Ut=Wilders(Up,Pds); 
Dt=Wilders(Dn,Pds);
RSIt=100*(Ut/(Ut+Dt)); 
/************End Code*************************/

/****Tom DeMark's Range Expansion Index***********/
HighMom = H - Ref( H, -2 );
LowMom = L - Ref( L, -2 );
Cond1 = ( H >= Ref( L,-5) OR H >= Ref( L, -6 ) ); 
Cond2 = ( Ref( H, -2 ) >= Ref( C, -7 ) OR Ref( H, -2 ) >= Ref( C, -8 ) ); 
Cond3 = ( L <= Ref( H, -5 ) OR L <= Ref( H, -6) ); 	
Cond4 = ( Ref( L, -2 ) <= Ref( C, -7 ) OR Ref( L, -2 ) <= Ref( C, -8 ) );
Cond = ( Cond1 OR Cond2 ) AND ( Cond3 OR Cond4 );
Num = IIf( Cond, HighMom + LowMom, 0 );
Den = abs(  HighMom ) + abs( LowMom );
TDREI = 100 * Sum( Num, 5 )/Sum( Den, 5 ) ;
/************End Code*************************/


/****Tom DeMark's DeMarker***********/

highm = IIf( H > Ref( H, -1 ), H - Ref( H, - 1), 0 );
lowm = IIf( L < Ref( L, -1 ), Ref( L, - 1 ) - L, 0 );

DeMarker = 100 *  Sum( highm, 13 )/( Sum( lowm, 13 ) + Sum( highm, 13 ) );


/****ARSI formula***********/
// variable  period version (backtest-safe)
Chg = C - Ref( C, -1 );
UpCount = Sum( Chg >= 0, Pds );
DnCount = Pds - UpCount;
UpMove = AMA( Max( Chg, 0 ), 1/UpCount );
DnMove = AMA( Max( -Chg, 0 ), 1/DnCount );
RS = UpMove/DnMove;
ARSI = 100-(100/(1+RS));
/************End Code*************************/


/****Projection Oscillator***********/

function ProjOsc(Pds) { 

// Slope of High {n period regression line of High)} 
SlopeHigh = ((Pds * (Sum( Cum(1) * High, Pds))) - (Sum( Cum(1),Pds) * ( 
Sum(High, Pds)))) / ((Pds * Sum( Cum(1) ^ 2 , Pds)) - (Sum(Cum(1),Pds) ^ 
2)); 

//Slope of Low {n period regression line of Low} 
SlopeLow = ((Pds * (Sum( Cum(1) * Low, Pds))) - (Sum( Cum(1), Pds) * ( 
Sum(Low, Pds)))) / ((Pds * Sum( Cum(1)^ 2, Pds)) - ( Sum(Cum(1),Pds) ^ 
2)); 

//Upper Projection Band 
UpProjBand = 0; 
for (i=0; i<Pds-1; i++) 
{ 
UpProjBand = 
Max(Max(Ref(High,-i)+i*slopehigh,Ref(High,-i-1)+(i+1)*slopehigh),UpProjBand); 
} 

//Lower Projection Band 
LoProjBand = 10000; 
for (i=0; i<Pds-1; i++) 
{ 
LoProjBand = 
Min(Min(Ref(Low,-i)+i*slopelow,Ref(Low,-i-1)+(i+1)*slopelow),LoProjBand); 
} 

//Projection Oscillator 
ProOsc = 100 * (Close - LoProjBand) / (UpProjBand - LoProjBand); 

return ProOsc; 

} 
aa= ProjOsc(Pds);
//bb= MA(ProjOsc(Pds),av);

//Plot(aa,"Projection Osc",colorBrightGreen,styleLine); 
//Plot(bb,"MA ProjOsc",colorRed,styleLine); 

/************End Code*************************/


/****Dynamic Momentum Index***********/

//period = Param( "RSI Period", 13, 1, 100, 1 );
//MAperiod = Param( "MA Period", 5, 1, 100, 1 );
//StDevperiod = Param( "StDev Period", 8, 1, 100, 1 );

upday=IIf(C>Ref(C,-1),C-Ref(C,-1),0);
downday=IIf(Ref(C,-1)> C,Ref(C,-1)-C,0);

Stda=MA(StDev(C,8),5);//by default 5 is maperiod n 8 is stdevperiod
V1=StDev(C,8)/Stda;
TD=int(Pds/V1);

Su=Sum(upday,TD);
Sd=Sum(downday,TD);
M1=(Su-Sd);
M2=abs(Su+Sd);
DMI=50*(M1+M2)/M2;
//xs=Param("Smoothing",3,1,10,1);
//xs1=Param("Trigger Line",5,1,10,1);
//Plot(EMA(DMI,xs),"Dynamic Momentum Index ",colorRed,1);
//Plot(MA(DMI,xs1),"trigger",colorBlue,1);

/************End Code*************************/

/****Stddev Oscillator***********/

StdevOsc=( ( C+2 * StDev( C,pds ) - MA( C,pds ) ) / ( 4 * StDev( C,pds ) ) ) * 100;


/************End Code*************************/


/*******Variables******************/

A1=RSIt; B2=RSI(pds); C3=CCI(pds); D4=StochK(pds); E5=StochD(pds);
F6=MFI(pds); G7=Ultimate(pds); H8=ROC(C,pds); I9=TDREI; J10=ARSI; K11=ProjOsc(Pds); L12= DMI; M13=StdevOsc ; N14 =DeMarker;//DO HERE 


oc=ParamList("Oscillator choice","RSI of MACD|RSI|CCI|StochK|StochD|Money Flow Index|Ultimate|ROC(Close)|Tom DeMark|ARSI|ProjOsc|DMI|StdevOsc|DeMarker",1);
Osc=
IIf(oc=="RSI of MACD",A1,
IIf(oc=="RSI",B2,
IIf(oc=="CCI",C3,
IIf(oc=="StochK",D4,
IIf(oc=="StochD",E5,
IIf(oc=="Money Flow Index",F6,
IIf(oc=="Ultimate",G7,
IIf(oc=="ROC(Close)",H8,
IIf(oc=="Tom DeMark",I9,
IIf(oc=="ARSI",J10,
IIf(oc=="ProjOsc",K11,
IIf(oc=="DMI",L12,
IIf(oc=="StdevOsc",M13,N14))))))))))))); //  /*insert variable by Identifier*/
/*Value of Osc*/
Value1 = Osc;

Header=WriteIf(Osc==A1," RSI Of MACD",WriteIf(Osc==b2," RSI",WriteIf(Osc==C3," CCI",WriteIf(Osc==D4,"STOCHK",WriteIf(Osc==E5,"STOCHD",WriteIf(Osc==F6," MONEY FLOW INDEX",WriteIf(Osc==G7," ULTIMATE",WriteIf(Osc==H8," ROC(CLOSE)",WriteIf(Osc==I9," Tom DeMark",WriteIf(Osc==J10," ARSI",WriteIf(Osc==K11," ProjOsc",WriteIf(Osc==L12," DMI",WriteIf(Osc==M13," StdevOsc",WriteIf(Osc==N14," DeMarker",""))))))))))))));//DO HERE



Plot(Value1, Header,6,1+4); /*BLUE*/

//Plot( Osc, "+Osc+", colorBlack ); 
PlotOHLC( Osc,Osc,50,Osc, "", IIf( Osc > 50, colorRed, colorGreen ), styleCloud | styleClipMinMax|styleNoLabel, Os, Ob );  
Buy = Cross (Osc, Os);
Sell = Cross (Ob, Osc);
PlotShapes(Buy*shapeUpArrow,colorGreen);
PlotShapes(Sell*shapeDownArrow,colorRed);
Plot(Os,"",colorAqua,1+4);
Plot(Ob,"",colorPink,1+4);
_SECTION_END();
_SECTION_BEGIN("SUPPORT/RESISTANCE");


SelectedIndicator = ParamList( "SUPPORT/RESISTANCE", "Trendlines_Wedge,fibo,STDDEVLNES", 0);


_SECTION_BEGIN("STDDEVLNES");
Daysback = Param("Period for Liner Regression Line",21,1,44000,1);
shift = Param("Look back period",0,0,240,1); 
LRColor = ParamColor("LR Color", colorRed ); 
SDP = Param("Standard Deviation", 1.3, 0, 13, 0.1);
SDColor = ParamColor("SD Color", colorYellow ); 
SDP2 = Param("2d Standard Deviation", 2.1, 0, 13, 0.1);
SDColor2 = ParamColor("2 SD Color", colorBrightGreen ); 
SDP3 = Param("3d Standard Deviation", 3.4, 0, 13, 0.1);
SDColor3 = ParamColor("3 SD Color", colorRed ); 
_SECTION_END();



switch ( SelectedIndicator )
{

case "STDDEVLNES":
_SECTION_BEGIN("STDDEVLNES");

P = Value1;

//  =============================== Math Formula =============================================================

x = BarIndex();
lastx = LastValue( x ) - shift; 
aa = LastValue( Ref(LinRegIntercept( p, Daysback), -shift) ); 
bb = LastValue( Ref(LinRegSlope( p, Daysback ), -shift) ); 
y = Aa + bb * ( x - (Lastx - DaysBack +1 ) ); 


// ==================Plot the Linear Regression Line ==========================================================


LRLine =  IIf( x > (lastx - Daysback) AND x < Lastx, y, Null );
Plot( LRLine , "LinReg", LRCOLOR, styleLine+4 ); //  styleDots ); 

// ==========================  Plot 1st SD Channel ===============================================================

SD = SDP/2;

width = LastValue( Ref(SD*StDev(p, Daysback),-shift) );   // THIS IS WHERE THE WIDTH OF THE CHANELS IS SET  
SDU = IIf( x > (lastx - Daysback) AND x < Lastx, y+width , Null ) ;
SDL = IIf( x > (lastx - Daysback) AND x < Lastx, y-width , Null ) ;

Plot( SDU , "Upper Lin Reg", SDColor,styleLine ); 
Plot( SDL , "Lower Lin Reg", SDColor,styleLine ); 

//  ==========================  Plot 2d SD Channel ===============================================================

SD2 = SDP2/2;

width2 = LastValue( Ref(SD2*StDev(p, Daysback),-shift) );   // THIS IS WHERE THE WIDTH OF THE CHANELS IS SET  
SDU2 = IIf( x > (lastx - Daysback) AND x < Lastx, y+width2 , Null ) ;
SDL2 = IIf( x > (lastx - Daysback) AND x < Lastx, y-width2 , Null ) ;

Plot( SDU2 , "Upper Lin Reg", SDColor2,styleLine ); 
Plot( SDL2 , "Lower Lin Reg", SDColor2,styleLine ); 


//  ==========================  Plot 3d SD Channel ===============================================================

SD3 = SDP3/2;

width3 = LastValue( Ref(SD3*StDev(p, Daysback),-shift) );   // THIS IS WHERE THE WIDTH OF THE CHANELS IS SET  
SDU3 = IIf( x > (lastx - Daysback) AND x < Lastx, y+width3 , Null ) ;
SDL3 = IIf( x > (lastx - Daysback) AND x < Lastx, y-width3 , Null ) ;

Plot( SDU3 , "Upper Lin Reg", SDColor3,styleDashed+4 ); 
Plot( SDL3 , "Lower Lin Reg", SDColor3,styleDashed+4 ); 

_SECTION_END();

break;
 
case "Trendlines_Wedge":
_SECTION_BEGIN("Trendlines_Wedge");
G=0;// set G=1, 2, 3, ... to see previous Resistance trendlines
GG=0;// set G=1, 2, 3, ... to see previous Support trendlines
x = Cum(1);
per = 1;// sensitivity calibration
s1=Value1;s11=Value1;
pS = TroughBars( s1, per, 1 ) == 0;
endt= LastValue(ValueWhen( pS, x, 1+GG ));
startt=LastValue(ValueWhen( pS, x, 2+GG ));
dtS =endt-startt;
endS = LastValue(ValueWhen( pS, s1, 1+GG ) );
startS = LastValue( ValueWhen( pS, s1, 2+GG  ));
aS = (endS-startS)/dtS;
bS = endS;
trendlineS = aS * ( x  -endt ) + bS;// the Support trendline equation 
Plot(IIf(x>startt-6 AND TRENDLINES>0 AND TRENDLINES<100,trendlineS,-1e10),"Support",IIf(as>0,5,4),8);
pR = PeakBars( s11, per, 1 ) == 0;
endt1= LastValue(ValueWhen( pR, x, 1+G ));
startt1=LastValue(ValueWhen( pR, x, 2+G ));
dtR =endt1-startt1;
endR = LastValue(ValueWhen( pR, s11, 1+G ) );
startR = LastValue( ValueWhen( pR, s11, 2 +G ));
aR = (endR-startR)/dtR;
bR = endR;
trendlineR = aR * ( x  -endt1 ) + bR;// the Resistance trendline equation
Plot(IIf(x>startT1-6  AND TRENDLINER>0 AND TRENDLINER<100,trendlineR,-1e10),"Resistance",IIf(Ar>0,5,4),8);
Ascwedge=Ar>0.5  AND As>sqrt(2)*Ar AND trendlineR>trendlineS;
Descwedge= As<-0.5 AND As>Ar/sqrt(2) AND trendlineR>trendlineS;
_SECTION_END();
break;
 
case "fibo":
_SECTION_BEGIN("fibo");
barvisible = Status("barvisible");
r = Value1;
maxr = LastValue( Highest( IIf( barvisible, r, 0 ) ) );
minr = LastValue( Lowest( IIf( barvisible, r, 100 ) ) );
ranr = maxr - minr;
Plot( maxr , "0%", colorGrey50,styleDashed );
Plot( maxr - 0.236 * ranr, "-23.6%", colorViolet,styleDashed+4 );
Plot( maxr - 0.382 * ranr, "-38.2%", colorYellow,styleDashed );
Plot( maxr - 0.50 * ranr, "-50.0%", colorOrange,styleDashed,styleDashed );
Plot( maxr - 0.618 * ranr, "-61.8%", colorViolet,styleDashed+4 );
Plot( minr , "-100%", colorGrey50,styleDashed );
GraphXSpace = 3;
_SECTION_END();

break;
}

_SECTION_END();
 

Similar threads