Know All about SENSEX

Discussion in 'Technical Analysis' started by anubak, Jul 16, 2005.

  1. anubak

    anubak New Member

    Joined:
    Jul 10, 2005
    Messages:
    16
    Likes Received:
    12
    Trophy Points:
    3
    Q.1 What is SENSEX?
    The SENSEX, short form of the BSE-Sensitive Index, is a "Market Capitalization-Weighted" index of 30 stocks representing a sample of large, well-established and financially sound companies. It is the oldest index in India and has acquired a unique place in the collective consciousness of investors. The index is widely used to measure the performance of the Indian stock markets. SENSEX is considered to be the pulse of the Indian stock markets as it represents the underlying universe of listed stocks at The Stock Exchange, Mumbai. Further, as the oldest index of the Indian Stock market, it provides time series data over a fairly long period of time (since 1978-79).


    Q.2 What are the objectives of SENSEX? The SENSEX is the benchmark index of the Indian Capital Markets with wide acceptance among individual investors, institutional investors, foreign investors and fund managers. The objectives of the index are:

    To measure market movements
    Given its long history and its wide acceptance, no other index matches the SENSEX in reflecting market movements and sentiments. SENSEX is widely used to describe the mood in the Indian Stock markets.

    Benchmark for funds performance
    The inclusion of blue chip companies and the wide and balanced industry representation in the SENSEX makes it the ideal benchmark for fund managers to compare the performance of their funds.

    For index based derivative products
    Institutional investors, money managers and small investors all refer to the SENSEX for their specific purposes The SENSEX is in effect the proxy for the Indian stock markets. The country's first derivative product i.e. Index-Futures was launched on SENSEX.


    Q.3 What are the criteria for selection and review of scrips for the SENSEX?
    A. Quantitative Criteria:

    1. Market Capitalization:
    The scrip should figure in the top 100 companies listed by market capitalization. Also market capitalization of each scrip should be more than 0.5 % of the total market capitalization of the Index i.e. the minimum weight should be 0.5 %. Since the SENSEX is a market capitalization weighted index, this is one of the primary criteria for scrip selection. (Market Capitalization would be averaged for last six months)

    2. Liquidity:
    (i) Trading Frequency: The scrip should have been traded on each and every trading day for the last one year. Exceptions can be made for extreme reasons like scrip suspension etc. (ii) Number of Trades: Number of Trades: The scrip should be among the top 150 companies listed by average number of trades per day for the last one year. (iii) Value of Shares Traded: Value of Shares Traded: The scrip should be among the top 150 companies listed by average value of shares traded per day for the last one year.

    3. Continuity:
    Whenever the composition of the index is changed, the continuity of historical series of index values is re-established by correlating the value of the revised index to the old index (index before revision). The back calculation over the last one-year period is carried out and correlation of the revised index to the old index should not be less than 0.98. This ensures that the historical continuity of the index is maintained.

    4. Industry Representation:
    Scrip selection would take into account a balanced representation of the listed companies in the universe of BSE. The index companies should be leaders in their industry group.

    5. Listed History:
    The scrip should have a listing history of at least one year on BSE.

    B. Qualitative Criteria:

    Track Record:
    In the opinion of the Index Committee, the company should have an acceptable track record.


    Q.4 What is the beta of SENSEX scrips?
    Beta measures the sensitivity of a scrip movement relative to movement in the benchmark index i.e. SENSEX. A Beta of one means that for every change of 1% in index, the scrip moves by 1%. Statistically Beta is defined as: Covariance (SENSEX, Stock )/ Variance(SENSEX)
    Note: Covariance and variance are calculated from the Daily Returns data of the SENSEX and SENSEX scrips.


    Q.5 How is SENSEX calculated? SENSEX is calculated using a "Market Capitalization-Weighted" methodology. As per this methodology, the level of index at any point of time reflects the total market value of 30 component stocks relative to a base period. (The market capitalization of a company is determined by multiplying the price of its stock by the number of shares issued by the company). An index of a set of a combined variables (such as price and number of shares) is commonly referred as a 'Composite Index' by statisticians. A single indexed number is used to represent the results of this calculation in order to make the value easier to work with and track over time. It is much easier to graph a chart based on indexed values than one based on actual values.

    The base period of SENSEX is 1978-79. The actual total market value of the stocks in the Index during the base period has been set equal to an indexed value of 100. This is often indicated by the notation 1978-79=100. The formula used to calculate the Index is fairly straightforward. However, the calculation of the adjustments to the Index (commonly called Index maintenance) is more complex.

    The calculation of SENSEX involves dividing the total market capitalization of 30 companies in the Index by a number called the Index Divisor. The Divisor is the only link to the original base period value of the SENSEX. It keeps the Index comparable over time and is the adjustment point for all Index maintenance adjustments. During market hours, prices of the index scrips, at which latest trades are executed, are used by the trading system to calculate SENSEX every 15 seconds and disseminated in real time.


    Q.6 How is the closing Index calculated? The closing SENSEX is computed taking the weighted average of all the trades on SENSEX constituents in the last 15 minutes of trading session. If a SENSEX constituent has not traded in the last 15 minutes, the last traded price is taken for computation of the Index closure. If a SENSEX constituent has not traded at all in a day, then its last day's closing price is taken for computation of Index closure. The use of Index Closure Algorithm prevents any intentional manipulation of the closing index value.


    Q.7 How are adjustments for Bonus, Rights and newly issued Capital carried out in SENSEX?
    The arithmetic calculation involved in calculating SENSEX is simple, but problem arises when one of the component stocks pays a bonus or issues rights shares. If no adjustments were made, a discontinuity would arise between the current value of the index and its previous value. The Index Cell of the Exchange periodically adjusts the base value to take care of such corporate announcements.
    Adjustments for Rights Issues:
    When a company, included in the compilation of the index, issues right shares, the market capitalisation of that company is increased by the number of additional shares issued based on the theoretical (ex-right) price. An offsetting or proportionate adjustment is then made to the Base Market Capitalisation (see ' Base Market Capitalisation Adjustment' below).
    Adjustments for Bonus Issue:
    When a company, included in the compilation of the index, issues bonus shares, the market capitalisation of that company does not undergo any change. Therefore, there is no change in the Base Market Capitalisation, only the 'number of shares' in the formula is updated.
    Other Issues: Base Market Capitalisation Adjustment is required when new shares are issued by way of conversion of debentures, mergers, spin-offs etc. or when equity is reduced by way of buy-back of shares, corporate restructuring etc.
    Base Market Capitalisation Adjustment: The formula for adjusting the Base Market Capitalisation is as follows:

    New Base Market Capitalisation = Old Base Market Capitalisation X (New Market Capitalisation/Old Market Capitalisation)

    To illustrate, suppose a company issues right shares which increases the market capitalisation of the shares of that company by say, Rs.100 crores. The existing Base Market Capitalisation (Old Base Market Capitalisation), say, is Rs.2450 crores and the aggregate market capitalisation of all the shares included in the index before the right issue is made is, say Rs.4781 crores. The "New Base Market Capitalisation " will then be: Rs.2501.24 crores = 2450 X (4781+100)/4781

    This figure of 2501.24 will be used as the Base Market Capitalisation for calculating the index number from then onwards till the next base change becomes necessary.


    Q.8 With what frequency is SENSEX calculation done?
    During market hours, prices of the index scrips, at which trades are executed, are automatically used by the trading computer to calculate the SENSEX every 15 seconds and continuously updated on all trading workstations connected to the BSE trading computer in real time.

    Happy Investing
     
  2. gobu

    gobu New Member

    Joined:
    Jun 24, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    how is sensex p/e calculated.
     
  3. aca_trader

    aca_trader Active Member

    Joined:
    Feb 3, 2006
    Messages:
    1,609
    Likes Received:
    16
    Trophy Points:
    38
    SENSEX P/E Ratio can be calculated in the same way as a company's P/E ratio is calculated.

    The steps can be like this.

    1. Divide Total Market Cap of Sensex Constituents by the total number of outstanding shares of the constituents. This will provide the numerator of the P/E ratio, i.e., price per share.

    2. Similarly, total the trailing earnings of all the constituents and divide the resultant sum once again with the total number outstanding shares of the constituents to get EPS, the denominator.

    3. Divide the numerator/denominator and you have the Sensex P/E ratio in hand.

    A short-cut method is:

    P/E = Market Cap/Total Earnings

    Regards,
    --Ashish
     
    vishalalluri likes this.
  4. Agilent

    Agilent Member

    Joined:
    Nov 5, 2005
    Messages:
    825
    Likes Received:
    11
    Trophy Points:
    18
    Thanks Ashish.. that was useful (Anubak... good initiative)

    Do u happen to have the workings of Sensex PE as at any recent date ... I mean individual PEs of the 30 scrips

    How often are these updated ? And what is the best ongoing source (website/publication?) of this info

    AGILENT
     
  5. pkjha30

    pkjha30 Well-Known Member

    Joined:
    Mar 24, 2005
    Messages:
    1,928
    Likes Received:
    214
    Trophy Points:
    63
    Location:
    India
    Hi

    Nifty and sensex PE is published daily on their website.
    Pankaj:)
     
  6. pkjha30

    pkjha30 Well-Known Member

    Joined:
    Mar 24, 2005
    Messages:
    1,928
    Likes Received:
    214
    Trophy Points:
    63
    Location:
    India

    Here's detail about Nifty

    Date -- P/E -- P/B -- Div Yield
    07-Jun-2006-- 16.21-- 4.23-- 1.66
    08-Jun-2006-- 15.44 --4.03-- 1.74
    09-Jun-2006-- 16.24-- 4.24-- 1.65
    12-Jun-2006-- 15.73-- 4.11-- 1.71
    13-Jun-2006-- 15.09-- 3.94-- 1.78
    14-Jun-2006-- 14.92-- 3.79-- 1.83
    15-Jun-2006-- 15.91-- 4.03-- 1.72
    16-Jun-2006-- 16.43 --4.17-- 1.67
    19-Jun-2006-- 16.58-- 4.20-- 1.65
    20-Jun-2006-- 16.27 --4.12-- 1.68
    21-Jun-2006-- 16.62 --4.21-- 1.65
    22-Jun-2006-- 17.03-- 4.32-- 1.61
    23-Jun-2006-- 17.30-- 4.39-- 1.58

    Pankaj:)
     
    vishalalluri likes this.

  7. pkjha30

    pkjha30 Well-Known Member

    Joined:
    Mar 24, 2005
    Messages:
    1,928
    Likes Received:
    214
    Trophy Points:
    63
    Location:
    India
    .....

    And Sensex

    Date--- Open--- High--- Low--- Close ---Price/Earnings Price/Bookvalue--- Dividend Yield
    21 June --- 9,828.93--- 10,054.05--- 9,752.65 --- 10,040.14--- 18.17--- 4.29--- 1.47
    22 June --- 10,093.38 --- 10,362.74--- 10,093.38 --- 10,275.88 --- 18.58--- 4.38 --- 1.44
    23 June --- 10,201.31 --- 10,453.61 --- 10,025.19 --- 10,401.30 --- 18.84 --- 4.44 --- 1.42

    Site Link
    http://www.bseindia.com/histdata/hindices2.asp

    Pankaj:)
     
    vishalalluri likes this.
  8. pkjha30

    pkjha30 Well-Known Member

    Joined:
    Mar 24, 2005
    Messages:
    1,928
    Likes Received:
    214
    Trophy Points:
    63
    Location:
    India
    Indian God had so many avatar.
    You have three till date.

    Give a target for PE12 for NSE and corresponding value of Indices, baron alias czar a.k.a. b@ron:D.
    Pankaj:)
     
  9. ghostbuster86

    ghostbuster86 New Member

    Joined:
    Jun 8, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    man i feel i have landed to the right place for increasing my knowlege about shares .
    thanks to all the participantc out here for sharing their vast knowlege.
    i really appreciate ur efforts.
    Sincere thanks:)
     
  10. raja_ib

    raja_ib New Member

    Joined:
    Nov 17, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    This is my first article when i interested to know about sensex. Its good and like the basic queries and answers for that one by one.

    thank you trader ji
     

Share This Page