tester with robot and video instruction :clap:
This completely automatic system ! ! !
I have written Video, what plows my system and here is else that: in my system broker not important!
2 links lead on one and ditto video:
here is very old terminal (compile only in him)
here is history:
sounds to tester and to 2-m robot to copy in file: BROKER_DIRECTORY\SOUNDS\
1.1.
What is a INTERLACING ?
- a mode wickerworks pigtail from sorted variable at start in tester beside you program on quick searching for from 12-th
point of the switching here is while this program is executed you may plait pigtails (maximum variable: 6)
for this will carry in INTERLACING importance "1" and will afterwards enter "1" in __refresh_now
and in variable with prefix _Frozen_, which you have defined for itself as pigtails, will enter -555 (immediately in all!)
and will afterwards enter "1" in __refresh_now
now ready?
but will now carry in INTERLACING amount of the entanglements for pigtail with your variable amount perepleteniy=[2...999]
and also if you want to change % not full deployment at the time of reactions these switching that simultaneously
with entering in "INTERLACING" importances >1, necessary also to carry in variable GENETIC METHOD STRENGTH [0-Disabled, 1...200]
your new % not full deployment and only afterwards enter "1" in __refresh_now
and wait the performances of the program on switching as of point...
but if in process of the performance of the program, you want, so to speak - distract tester from main task, that will
enter -10000 in other variable with prefix _Frozen_
if you want to plait else other pigtails, that will first enter -7777 in variable __refresh_now and already afterwards
repeat all with step 1.1. :thumb:
if you want to look whole program of the switching, which you "have braided" that will first carry in INTERLACING
importance "0" and will enter "1" in __refresh_now and only afterwards possible enter -555 in __refresh_now for viewing
of whole program
but this new variable, about which I nothing have not haved time to to tell:
MINIMAL LAG FOR STATIC GAP=200 - for finding Gap without temporary breakup if you recall my video, that I there wondered
when occurred this most jump of the price USE TRAILING STOP FIRST [0/1]=0 - sometimes because of it warrant is closed
practically on kopeck USE BUILT-IN PROFIT SEARCH PROGRAMM [0/1]=1 - use start program for searching for
MG DOUBLE DEFENCE MODE [0/1]=1 - a mode of protection of the protector (this for mode Martin Gail)
mini-boot "Test_Spread.mq4" for searching for DC with fixed spread that real could trade in my system you need 'XP but
if simply you want to write teaks and drive them on tester - that any OS will approach
I enclose the picture of the screen (with server no relationship) on one vapour(pair):
Receiver.mq4 little changed:
Swing thence (sources and ex4 on English - error of wrong Take Profit is Fixed)
Also Tracer_GR have been Fixed in to correctly switching on switch-point's
Also gluided 3 file Origin
here is contents of the file unchangeable parameters CONFIG_GR.txt:
GBPJPY:
LOSS INSPECTION [0/1]=1
STATIC DATA ALLIGMENT IN HOURS [0-Disabled, >0]=500
MAXIMUM OF ORDERS [1...>]=10
CRUSER MODE [0/1]=0
CRUSER MIN DEPO [1...>]=800.00
CRUSER LOT INCREASE=0.03000
CRUSER MAX LOT ZOOM [1...>]=8
CRUSER SAFE AREA IN PIPS [1...>]=6
GENETIC METHOD STRENGTH [0-Disabled, 1...200]=100.0
RECHECK DIRECTION AFTER WAITING [0/1]=1
MIN TPS [0-Disabled, 1...>]=1
MG Engine [0/1]=1
FRIDAY STOP TRADE HOUR [-1, 0...24]=23
MG SURE CLOSE [0/1]=0
TRADE CONTROL [0/1]=1
LOT SIZE IN PERCENT=8.00000
WEEKEND PRE STOP IN HOURS [0...12]=0.2
GAP PRE STOP IN HOURS [0...12]=3.0
MINIMAL LAG FOR GAP=10
BORDER LIMIT LAG [0-Disabled, 1...>]=0
MAX TPS [0-Disabled, 1...>]=0
SPREAD ON YOUR TRADE TERMINAL (0-AUTO)= определить с помощью Info_script.ex4
DIGITS=3
USE LIMIT ORDERS ON RISE [0/1]=1
LIVERAGE [1...>]=100
DIGITS OF LOT=2
ADVANCED GEN CYCLE DEPTH [0-Disabled, >0-Enabled]=9999
START LAG CHECKING [0/1]=0
GENETHIC AUTO INCREASE MODE [0/1]=0
ADDITION SECONDS LIFE OF NOISE PENDING [0...>]=0
USE MEDIUM VALUE WHEN GENETIC MODE STARTED [0/1]=1
SECONDS BORDER FOR GAP DETECTION=30
TRADE CONTROL ZOOM [0...>]=1.17
ENABLE SMART PROFIT SELECTION IN ONE LOOP [0/1]=1
PRICE CONTROL [0/1]=0
ENABLE PLAY SOUND IF PROFIT CONFIG IS FOUND [0/1]=1
ADDITION SECONDS LIFE OF SILENT PENDING [0...>]=0
RANDOM SWITCH IN TO ADVANCED GEN MODULE [0/1]=1
USE BI-DIRECTIONAL PENDING EXECUTION [0/1]=0
SKIP BY DEFAULT VALUE [0/1]=0
PROFESSIONAL MODE [0/1]=0
BALANCE MAXIMAL PERCENT OF LOSS=80.00
START DEPOSIT=800.00
MINIMAL LAG FOR STATIC GAP=200
USE TRAILING STOP FIRST [0/1]=0
USE BUILT-IN PROFIT SEARCH PROGRAMM [0/1]=0
MG DOUBLE DEFENCE MODE [0/1]=1
here is contents of the files sorted parameters TRACER_CFG.txt:
GBPJPY:
SHOW TRACED PROGRESS [0/1]=0
AUTOCONTINUE FROM FILE NZDJPY.CON (Time Period in Seconds) [0-DISABLED, >0]=62
UNUSED=0
UNUSED=0
ENTRY POINTS IN HISTORY DATA [1...20]=9
UNUSED=0
USE FIVE DIGITS [0/1]=1
CHANNEL OLD MIN [1...>]=1000
CHANNEL OLD MAX [1...>]=1000
CHANNEL OLD STEP [1...>]=5
TRADE SHIFT ON TURN-STOP MIN [1...>]=70
TRADE SHIFT ON TURN-STOP MAX [1...>]=70
TRADE SHIFT ON TURN-STOP STEP [1...>]=1
CHANNEL FRESH MIN [0...>]=1000
CHANNEL FRESH MAX [0...>]=1000
WAITING TIME IN SECONDS MIN [1...>]=5
WAITING TIME IN SECONDS MAX [1...>]=5
WAITING TIME IN SECONDS STEP [1...>]=10
CHANNEL FRESH STEP=5
RISE PIPS OLD MIN [3...>]=2
RISE PIPS OLD MAX [3...>]=2
ANALIZE TICK MIN [2...>]=5
ANALIZE TICK MAX [2...>]=20
ANALIZE TICK STEP [1...>]=1
ORDERLIFE ON TURN-LIMIT MIN [0...>]=0
ORDERLIFE ON TURN-LIMIT MAX [0...>]=0
ORDERLIFE ON TURN-LIMIT STEP [1...>]=1
TRAILING STOP MIN [1...>]=30
TRAILING STOP MAX [1...>]=200
TRAILING STOP STEP [1...>]=10
TRAILING STOP FIRST MIN [1...>]=99
TRAILING STOP FIRST MAX [1...>]=99
TRAILING STOP FIRST STEP [1...>]=1
UNUSED MIN [0...99]=0
UNUSED MAX [0...99]=0
RISE PIPS OLD STEP [1...>]=1
MAX LOSS IN DEPOSIT MIN [1...>]=2
MAX LOSS IN DEPOSIT MAX [1...>]=250
MAX LOSS IN DEPOSIT STEP [1...>]=10
ORDERLIFE ON TURN-STOP MIN [0...>]=0
ORDERLIFE ON TURN-STOP MAX [0...>]=0
ORDERLIFE ON TURN-STOP STEP [1...>]=1
TRADE SHIFT ON TURN-LIMIT MIN [1...>]=70
TRADE SHIFT ON TURN-LIMIT MAX [1...>]=70
TRADE SHIFT ON TURN-LIMIT STEP [1...>]=1
ORDER LIFE MIN [1...>]=1000
ORDER LIFE MAX [1...>]=1000
ORDER LIFE STEP [1...>]=1
MG ZOOM MIN [1...>]=1.00
MG ZOOM MAX [1...>]=1.00
MG ZOOM STEP [1...>]=0.02
(PRC)CANDLE WAITING IN SECONDS MIN [0...>]=1
(PRC)CANDLE WAITING IN SECONDS MAX [0...>]=30
(PRC)CANDLE WAITING IN SECONDS STEP [1...>]=1
RISE PIPS MIN [3...>]=2
RISE PIPS MAX [3...>]=2
RISE PIPS STEP [1...>]=1
MG DEPTH IN PIPS MIN [1...>]=20
MG DEPTH IN PIPS MAX [1...>]=250
MG DEPTH IN PIPS STEP [1...>]=1
PERCENT OF CUT MIN [1...>]=50
PERCENT OF CUT MAX [1...>]=50
PERCENT OF CUT STEP [1...>]=1
TRADE SHIFT MIN [3...>]=5
TRADE SHIFT MAX [3...>]=5
TRADE SHIFT STEP [1...>]=1
TRACE METHOD 0-File / 1-Array [0/1]=1
under such (see above) to adjustment tester finds profit through 1-2 hours and moreover get prettier profit in Martin
the advice: after 2-h hours of searching for to change the step of the change for the following sorted values
and change % not full deployment before 20 here is parameters, subjecting to change the step (LIVE):
variable TRAILING STOP has got importance for step=1
variable MG DEPTH has got importance for step=1
variable MAX LOSS IN DEPOSIT has got importance for step=1
as this do?
- I shall cite an instance only for variable "TRAILING STOP" (-further themselves...):
-Press F3 in tester
-in parameter "_Frozen_TRAILING STOP" contribute importance -111
-in parameter "TRAILING STOP" contribute importance 1
-in parameter "__refresh_now" contribute 1 -Press "close"
why exactly in Martin?
- since in him reliable
- in he immediately Locking (s opposite warrant with such- lot) of the warrant and robot
simply takes out of hot griddle roasted patty - as soon as has removed one patty,
- that system immediately places there another and etc. (I a little was not touched!)
that else wanted to say:
if you want to change the testable vapour(pair) for tester, that do following:
- do not do so, as I have shown in video-instructions since this long!
- see upwards this subject - there there is contents 2-h files parameter
-change exchange vapour(pair) at the beginning initially 2-h files
-change parameter DIGITS=(here or 5, or 3{for JPY-combination})
-change parameter SPREAD ON YOUR TRADE TERMINAL (0-AUTO)=
-see current Spread with Info_script.ex4 and insert here ^^^
-so it is necessary to test all pair(vapour)s!
-how much it is necessary histories - 15-20 days (For Martin it is necessary much histories) :lol:
This completely automatic system ! ! !
I have written Video, what plows my system and here is else that: in my system broker not important!
2 links lead on one and ditto video:
Code:
https://www.sendspace.com/file/lyu7ah
Code:
https://youtu.be/A9p9RxFYHOQhere is very old terminal (compile only in him)
Code:
https://www.sendspace.com/file/tbrr6q
Code:
http://tbf.me/a/tWGa21.1.
What is a INTERLACING ?
- a mode wickerworks pigtail from sorted variable at start in tester beside you program on quick searching for from 12-th
point of the switching here is while this program is executed you may plait pigtails (maximum variable: 6)
for this will carry in INTERLACING importance "1" and will afterwards enter "1" in __refresh_now
and in variable with prefix _Frozen_, which you have defined for itself as pigtails, will enter -555 (immediately in all!)
and will afterwards enter "1" in __refresh_now
now ready?
but will now carry in INTERLACING amount of the entanglements for pigtail with your variable amount perepleteniy=[2...999]
and also if you want to change % not full deployment at the time of reactions these switching that simultaneously
with entering in "INTERLACING" importances >1, necessary also to carry in variable GENETIC METHOD STRENGTH [0-Disabled, 1...200]
your new % not full deployment and only afterwards enter "1" in __refresh_now
and wait the performances of the program on switching as of point...
but if in process of the performance of the program, you want, so to speak - distract tester from main task, that will
enter -10000 in other variable with prefix _Frozen_
if you want to plait else other pigtails, that will first enter -7777 in variable __refresh_now and already afterwards
repeat all with step 1.1. :thumb:
if you want to look whole program of the switching, which you "have braided" that will first carry in INTERLACING
importance "0" and will enter "1" in __refresh_now and only afterwards possible enter -555 in __refresh_now for viewing
of whole program
but this new variable, about which I nothing have not haved time to to tell:
MINIMAL LAG FOR STATIC GAP=200 - for finding Gap without temporary breakup if you recall my video, that I there wondered
when occurred this most jump of the price USE TRAILING STOP FIRST [0/1]=0 - sometimes because of it warrant is closed
practically on kopeck USE BUILT-IN PROFIT SEARCH PROGRAMM [0/1]=1 - use start program for searching for
MG DOUBLE DEFENCE MODE [0/1]=1 - a mode of protection of the protector (this for mode Martin Gail)
mini-boot "Test_Spread.mq4" for searching for DC with fixed spread that real could trade in my system you need 'XP but
if simply you want to write teaks and drive them on tester - that any OS will approach
I enclose the picture of the screen (with server no relationship) on one vapour(pair):
Receiver.mq4 little changed:
Swing thence (sources and ex4 on English - error of wrong Take Profit is Fixed)
Also Tracer_GR have been Fixed in to correctly switching on switch-point's
Also gluided 3 file Origin
Code:
http://tbf.me/a/ytX3hGBPJPY:
LOSS INSPECTION [0/1]=1
STATIC DATA ALLIGMENT IN HOURS [0-Disabled, >0]=500
MAXIMUM OF ORDERS [1...>]=10
CRUSER MODE [0/1]=0
CRUSER MIN DEPO [1...>]=800.00
CRUSER LOT INCREASE=0.03000
CRUSER MAX LOT ZOOM [1...>]=8
CRUSER SAFE AREA IN PIPS [1...>]=6
GENETIC METHOD STRENGTH [0-Disabled, 1...200]=100.0
RECHECK DIRECTION AFTER WAITING [0/1]=1
MIN TPS [0-Disabled, 1...>]=1
MG Engine [0/1]=1
FRIDAY STOP TRADE HOUR [-1, 0...24]=23
MG SURE CLOSE [0/1]=0
TRADE CONTROL [0/1]=1
LOT SIZE IN PERCENT=8.00000
WEEKEND PRE STOP IN HOURS [0...12]=0.2
GAP PRE STOP IN HOURS [0...12]=3.0
MINIMAL LAG FOR GAP=10
BORDER LIMIT LAG [0-Disabled, 1...>]=0
MAX TPS [0-Disabled, 1...>]=0
SPREAD ON YOUR TRADE TERMINAL (0-AUTO)= определить с помощью Info_script.ex4
DIGITS=3
USE LIMIT ORDERS ON RISE [0/1]=1
LIVERAGE [1...>]=100
DIGITS OF LOT=2
ADVANCED GEN CYCLE DEPTH [0-Disabled, >0-Enabled]=9999
START LAG CHECKING [0/1]=0
GENETHIC AUTO INCREASE MODE [0/1]=0
ADDITION SECONDS LIFE OF NOISE PENDING [0...>]=0
USE MEDIUM VALUE WHEN GENETIC MODE STARTED [0/1]=1
SECONDS BORDER FOR GAP DETECTION=30
TRADE CONTROL ZOOM [0...>]=1.17
ENABLE SMART PROFIT SELECTION IN ONE LOOP [0/1]=1
PRICE CONTROL [0/1]=0
ENABLE PLAY SOUND IF PROFIT CONFIG IS FOUND [0/1]=1
ADDITION SECONDS LIFE OF SILENT PENDING [0...>]=0
RANDOM SWITCH IN TO ADVANCED GEN MODULE [0/1]=1
USE BI-DIRECTIONAL PENDING EXECUTION [0/1]=0
SKIP BY DEFAULT VALUE [0/1]=0
PROFESSIONAL MODE [0/1]=0
BALANCE MAXIMAL PERCENT OF LOSS=80.00
START DEPOSIT=800.00
MINIMAL LAG FOR STATIC GAP=200
USE TRAILING STOP FIRST [0/1]=0
USE BUILT-IN PROFIT SEARCH PROGRAMM [0/1]=0
MG DOUBLE DEFENCE MODE [0/1]=1
here is contents of the files sorted parameters TRACER_CFG.txt:
GBPJPY:
SHOW TRACED PROGRESS [0/1]=0
AUTOCONTINUE FROM FILE NZDJPY.CON (Time Period in Seconds) [0-DISABLED, >0]=62
UNUSED=0
UNUSED=0
ENTRY POINTS IN HISTORY DATA [1...20]=9
UNUSED=0
USE FIVE DIGITS [0/1]=1
CHANNEL OLD MIN [1...>]=1000
CHANNEL OLD MAX [1...>]=1000
CHANNEL OLD STEP [1...>]=5
TRADE SHIFT ON TURN-STOP MIN [1...>]=70
TRADE SHIFT ON TURN-STOP MAX [1...>]=70
TRADE SHIFT ON TURN-STOP STEP [1...>]=1
CHANNEL FRESH MIN [0...>]=1000
CHANNEL FRESH MAX [0...>]=1000
WAITING TIME IN SECONDS MIN [1...>]=5
WAITING TIME IN SECONDS MAX [1...>]=5
WAITING TIME IN SECONDS STEP [1...>]=10
CHANNEL FRESH STEP=5
RISE PIPS OLD MIN [3...>]=2
RISE PIPS OLD MAX [3...>]=2
ANALIZE TICK MIN [2...>]=5
ANALIZE TICK MAX [2...>]=20
ANALIZE TICK STEP [1...>]=1
ORDERLIFE ON TURN-LIMIT MIN [0...>]=0
ORDERLIFE ON TURN-LIMIT MAX [0...>]=0
ORDERLIFE ON TURN-LIMIT STEP [1...>]=1
TRAILING STOP MIN [1...>]=30
TRAILING STOP MAX [1...>]=200
TRAILING STOP STEP [1...>]=10
TRAILING STOP FIRST MIN [1...>]=99
TRAILING STOP FIRST MAX [1...>]=99
TRAILING STOP FIRST STEP [1...>]=1
UNUSED MIN [0...99]=0
UNUSED MAX [0...99]=0
RISE PIPS OLD STEP [1...>]=1
MAX LOSS IN DEPOSIT MIN [1...>]=2
MAX LOSS IN DEPOSIT MAX [1...>]=250
MAX LOSS IN DEPOSIT STEP [1...>]=10
ORDERLIFE ON TURN-STOP MIN [0...>]=0
ORDERLIFE ON TURN-STOP MAX [0...>]=0
ORDERLIFE ON TURN-STOP STEP [1...>]=1
TRADE SHIFT ON TURN-LIMIT MIN [1...>]=70
TRADE SHIFT ON TURN-LIMIT MAX [1...>]=70
TRADE SHIFT ON TURN-LIMIT STEP [1...>]=1
ORDER LIFE MIN [1...>]=1000
ORDER LIFE MAX [1...>]=1000
ORDER LIFE STEP [1...>]=1
MG ZOOM MIN [1...>]=1.00
MG ZOOM MAX [1...>]=1.00
MG ZOOM STEP [1...>]=0.02
(PRC)CANDLE WAITING IN SECONDS MIN [0...>]=1
(PRC)CANDLE WAITING IN SECONDS MAX [0...>]=30
(PRC)CANDLE WAITING IN SECONDS STEP [1...>]=1
RISE PIPS MIN [3...>]=2
RISE PIPS MAX [3...>]=2
RISE PIPS STEP [1...>]=1
MG DEPTH IN PIPS MIN [1...>]=20
MG DEPTH IN PIPS MAX [1...>]=250
MG DEPTH IN PIPS STEP [1...>]=1
PERCENT OF CUT MIN [1...>]=50
PERCENT OF CUT MAX [1...>]=50
PERCENT OF CUT STEP [1...>]=1
TRADE SHIFT MIN [3...>]=5
TRADE SHIFT MAX [3...>]=5
TRADE SHIFT STEP [1...>]=1
TRACE METHOD 0-File / 1-Array [0/1]=1
under such (see above) to adjustment tester finds profit through 1-2 hours and moreover get prettier profit in Martin
the advice: after 2-h hours of searching for to change the step of the change for the following sorted values
and change % not full deployment before 20 here is parameters, subjecting to change the step (LIVE):
variable TRAILING STOP has got importance for step=1
variable MG DEPTH has got importance for step=1
variable MAX LOSS IN DEPOSIT has got importance for step=1
as this do?
- I shall cite an instance only for variable "TRAILING STOP" (-further themselves...):
-Press F3 in tester
-in parameter "_Frozen_TRAILING STOP" contribute importance -111
-in parameter "TRAILING STOP" contribute importance 1
-in parameter "__refresh_now" contribute 1 -Press "close"
why exactly in Martin?
- since in him reliable
- in he immediately Locking (s opposite warrant with such- lot) of the warrant and robot
simply takes out of hot griddle roasted patty - as soon as has removed one patty,
- that system immediately places there another and etc. (I a little was not touched!)
that else wanted to say:
if you want to change the testable vapour(pair) for tester, that do following:
- do not do so, as I have shown in video-instructions since this long!
- see upwards this subject - there there is contents 2-h files parameter
-change exchange vapour(pair) at the beginning initially 2-h files
-change parameter DIGITS=(here or 5, or 3{for JPY-combination})
-change parameter SPREAD ON YOUR TRADE TERMINAL (0-AUTO)=
-see current Spread with Info_script.ex4 and insert here ^^^
-so it is necessary to test all pair(vapour)s!
-how much it is necessary histories - 15-20 days (For Martin it is necessary much histories) :lol:
