free development of strategy for amibroker to traderji members...

Can you please develop an AFL for the below mentioned strategy:
Basic Setup – 15 Minute Intraday Chart with minimum 30 days data backfill.
Indicators – 5 Days Exponential Moving Average (DEMA) & 21 DEMA. Optional Swing Setting with 0.10% setting for easy reference of Tops & Bottoms.

Strategy – Will go long when 5DEMA crosses 21 DEMA from below and will exit long as well as go short when 5DEMA crosses 21 DEMA from above. Simple System, that’s it! Please note that you will always carrying Long or Short positions once you entered in to the trade. If first trade is Go Long, Buy 1 Lot of Nifty and when there is reversal sell 1 lot which you are long and sell one more lot as a Short sale.

Stop Loss – There is in built stop loss in the system. You need to c/fd your positions till next crossover happens. Hence you will be with the market and with the on-going trend, just before it reverses. Also note that since markets are always volatile, you will get whipsawed very easily. Do not worry, system is back tested and you will surprise to see that maximum loss was just 83 points and consecutive loss (in 6 trades) was 231 points.

Profits – Well before following this practically, I did mock trading for 1 month and found excellent response from my strategy. However, practically doing overnight positional trades very initially difficult and I was getting carried always by analysts on TV channels. But as I decided stick to the charts and that paid me off. After 2-3 initial loss trades I got big profit and my account size started getting bigger.


It would be advisable to follow basic money management rules. Like I did, I started with initial capital of Rs 1, 00,000 and traded 150 Nifty at a time. No less and No more. Money management is crucial part of any strategy.

ANYBODY WHO CAN GIVE ME AN AFL FOR AMIBROKER WHICH CAN GIVE ME BUY SELL CALLS FOR JUST 0.17%-0.2% PROFIT IN DAY TRADES...CAN ANYBODY PLEASE DO THAT FOR ME....I M DAY TRADER ie JOBBER.....PLEASE.......
I JUST NEED 50 PAISE PROFIT FOR A STOCK OF RS 300......

hi frnd pls try this....

_SECTION_BEGIN("Price ADX");
function PercentR( periods )
{ return -100 * ( HHV( H, periods ) - C )/( HHV( H, periods ) - LLV( L, periods
) ); }
range = Param("Periods", 14, 2, 200, 1 );
ADX(range);
PDI(range) ;
MDI(range);
SetChartOptions(0,chartShowArrows|chartShowDates);
_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, Hi %g, Lo %g,
Close %g (%.1f%%) Vol " +WriteVal( V, 1.0 ) +" {{VALUES}}", O, H, L, C,
SelectedValue( ROC( C, 1 )) ));
Plot( C, "Close", IIf( PDI(range) > MDI(range), ParamColor("Up Color",
colorGreen ), ParamColor("Down Color", colorRed ) ), styleNoTitle |
ParamStyle("Style") | GetPriceStyle() );
Bull_Trend=(PercentR( Param("Periods", 14, 2, 100 ) )> -30);
Bear_Trend=(PercentR( Param("Periods", 14, 2, 100 ) )< -70);
Ribbon_kol=IIf( Bull_Trend, colorGreen, IIf(Bear_Trend, colorRed,colorYellow))
;
Plot(6, "ribbon", Ribbon_kol, styleOwnScale| styleArea|
styleNoLabel,-0.5,100);
_SECTION_END();

_SECTION_BEGIN("DispMA");
P = ParamField("Field");
Type = ParamList("Type", "Simple,Exponential,Double Exponential,Tripple
Exponential,Wilders,Weighted");
Periods = Param("Periods", 30, 2, 100 );
Displacement = Param("Displacement", 15, -50, 50 );
SL= (HHV(H,13)+LLV(L,13))/2;
TL= (HHV(H,9)+LLV(L,9))/2;
m = Ref((SL+TL)/2,-2);
if( Type == "Simple" ) m = MA( P, Periods );
if( Type == "Exponential" ) m = EMA( P, Periods );
if( Type == "Double Exponential" ) m = DEMA( P, Periods );
if( Type == "Tripple Exponential" ) m = TEMA( P, Periods );
if( Type == "Wilders" ) m = Wilders( P, Periods );
if( Type == "Weighted" ) m = WMA( P, Periods );

Plot( m, _DEFAULT_NAME(), IIf( C > m, ParamColor("Up Color", colorGreen ),
ParamColor("Down Color", colorRed ) ), styleLine, 0, 0, Displacement );
_SECTION_END();

/* **********************************

Code to automatically identify pivots

********************************** */
// -- what will be our lookback range for the hh and ll?
farback=Param("How Far back to go",100,50,5000,10);
nBars = Param("Number of bars", 12, 5, 40);
// -- Title.
Title = Name() + " (" + StrLeft(FullName(), 15) + ") O: " + Open + ",
H: " + High + ", L: " + Low + ", C: " + Close;
// -- Plot basic candle chart
PlotOHLC(Open, High, Low, Close,
"BIdx = " + BarIndex() +
"\n" + "O = " + O + "\n"+"H = "+ H + "\n"+"L = " + L
+ "\n"+"C ",
colorBlack, styleCandle);
GraphXSpace=7;
// -- Create 0-initialized arrays the size of barcount
aHPivs = H - H;
aLPivs = L - L;
// -- More for future use, not necessary for basic plotting
aHPivHighs = H - H;
aLPivLows = L - L;
aHPivIdxs = H - H;
aLPivIdxs = L - L;
nHPivs = 0;
nLPivs = 0;
lastHPIdx = 0;
lastLPIdx = 0;
lastHPH = 0;
lastLPL = 0;
curPivBarIdx = 0;
// -- looking back from the current bar, how many bars
// back were the hhv and llv values of the previous
// n bars, etc.?
aHHVBars = HHVBars(H, nBars);
aLLVBars = LLVBars(L, nBars);
aHHV = HHV(H, nBars);
aLLV = LLV(L, nBars);
// -- Would like to set this up so pivots are calculated back from
// last visible bar to make it easy to "go back" and see the pivots
// this code would find. However, the first instance of
// _Trace output will show a value of 0
aVisBars = Status("barvisible");
nLastVisBar = LastValue(Highest(IIf(aVisBars, BarIndex(), 0)));
_TRACE("Last visible bar: " + nLastVisBar);
// -- Initialize value of curTrend
curBar = (BarCount-1);
curTrend = "";
if (aLLVBars[curBar] <
aHHVBars[curBar]) {
curTrend = "D";
}
else {
curTrend = "U";
}
// -- Loop through bars. Search for
// entirely array-based approach
// in future version
for (i=0; i<farback; i++) {
curBar = (BarCount - 1) - i;
// -- Have we identified a pivot? If trend is down...
if (aLLVBars[curBar] < aHHVBars[curBar]) {
// ... and had been up, this is a trend change
if (curTrend == "U") {
curTrend = "D";
// -- Capture pivot information
curPivBarIdx = curBar - aLLVBars[curBar];
aLPivs[curPivBarIdx] = 1;
aLPivLows[nLPivs] = L[curPivBarIdx];
aLPivIdxs[nLPivs] = curPivBarIdx;
nLPivs++;
}
// -- or current trend is up
} else {
if (curTrend == "D") {
curTrend = "U";
curPivBarIdx = curBar - aHHVBars[curBar];
aHPivs[curPivBarIdx] = 1;
aHPivHighs[nHPivs] = H[curPivBarIdx];
aHPivIdxs[nHPivs] = curPivBarIdx;
nHPivs++;
}
// -- If curTrend is up...else...
}
// -- loop through bars
}
// -- Basic attempt to add a pivot this logic may have missed
// -- OK, now I want to look at last two pivots. If the most
// recent low pivot is after the last high, I could
// still have a high pivot that I didn't catch
// -- Start at last bar
curBar = (BarCount-1);
candIdx = 0;
candPrc = 0;
lastLPIdx = aLPivIdxs[0];
lastLPL = aLPivLows[0];
lastHPIdx = aHPivIdxs[0];
lastHPH = aHPivHighs[0];
if (lastLPIdx > lastHPIdx) {
// -- Bar and price info for candidate pivot
candIdx = curBar - aHHVBars[curBar];
candPrc = aHHV[curBar];
if (
lastHPH < candPrc AND
candIdx > lastLPIdx AND
candIdx < curBar) {
// -- OK, we'll add this as a pivot...
aHPivs[candIdx] = 1;
// ...and then rearrange elements in the
// pivot information arrays
for (j=0; j<nHPivs; j++) {
aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-
(j+1)];
aHPivIdxs[nHPivs-j] = aHPivIdxs[nHPivs-(j+1)];
}
aHPivHighs[0] = candPrc ;
aHPivIdxs[0] = candIdx;
nHPivs++;
}
} else {
// -- Bar and price info for candidate pivot
candIdx = curBar - aLLVBars[curBar];
candPrc = aLLV[curBar];
if (
lastLPL > candPrc AND
candIdx > lastHPIdx AND
candIdx < curBar) {
// -- OK, we'll add this as a pivot...
aLPivs[candIdx] = 1;
// ...and then rearrange elements in the
// pivot information arrays
for (j=0; j<nLPivs; j++) {
aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
}
aLPivLows[0] = candPrc;
aLPivIdxs[0] = candIdx;
nLPivs++;
}
}
// -- Dump inventory of high pivots for debugging
/*
for (k=0; k<nHPivs; k++) {
_TRACE("High pivot no. " + k
+ " at barindex: " + aHPivIdxs[k] + ", "
+ WriteVal(ValueWhen(BarIndex()==aHPivIdxs[k],
DateTime(), 1), formatDateTime)
+ ", " + aHPivHighs[k]);
}
*/
// -- OK, let's plot the pivots using arrows
PlotShapes(IIf(aHPivs==1, shapeDownArrow, shapeNone), colorRed, 0, High,
Offset=-15);
PlotShapes(IIf(aLPivs==1, shapeUpArrow , shapeNone), colorBlue, 0, Low,
Offset=-15);

_SECTION_BEGIN("Bollinger Bands");
P = ParamField("Price field",-1);
Periods = Param("Periods", 15, 2, 100, 1 );
Width = Param("Width", 2, 0, 10, 0.05 );
Color = ParamColor("Color", colorCycle );
Style = ParamStyle("Style");
Plot( BBandTop( P, Periods, Width ), "BBTop" + _PARAM_VALUES(), Color, Style );

Plot( BBandBot( P, Periods, Width ), "BBBot" + _PARAM_VALUES(), Color, Style );

_SECTION_END();

_SECTION_BEGIN("EMA1");
P = ParamField("Price field",-1);
Periods = Param("Periods", 15, 2, 200, 1, 10 );
Plot( EMA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorCycle ),
ParamStyle("Style") );
_SECTION_END();

hi dude

this afl is really awesome i would like to know the concept behind this i have back tested this system it was perfect in intra and eod but not yet implemented in real trade
have u tried trading using this setup dudee

waiting 4r the reply yarrrrrrrrrrr